#578A - 3 x 5-1/4 x 3-3/8'' - V-Block & Clamp Set
Have a Question About a Product?
Our team is here to answer all your questions and provide the detailed information and support you need to make product decisions.
Contact Us#578A - 3 x 5-1/4 x 3-3/8'' - V-Block & Clamp Set
ManufacturerStarrett
Part #MV7064960
MFG #MV7064960
#578A - 3 x 5-1/4 x 3-3/8'' - V-Block & Clamp Set
$1,104.16
 / EAKnowledgeable Product TeamBenefit from our experienced team, ready to assist you with expert product knowledge and ensure a seamless shopping experience.
- Manufacturer Name:Â L.S. StarrettCapacity:Â Max. Dia. 4" Min. Dia. 9/16"Number of Blocks:Â 1Size:Â 3 x 5-1/4 x 3-3/8
- ‎
- This V-block will handle round work up to a diameter of 4 with the same precision and accuracy of other Starrett V-blocks. The block can be used on its side or on its end for machining or inspection, with no interference from the clamp. A reversible swing-away style clamp that clamps against almost any shape of product part is furnished with the unit. The three tapped hole positions in the V-block for the clamp allows the clamp to be positioned at either end or at the center of the V-block. Two tapped holes in one end of the V-block provide for mounting it perpendicular to a face plate. Clearance holes in the bottom provide for mounting the V-block to angle plates or other fixturing. The block is 5–1/4 wide, 3 , high and 3–3/8 long and made of hardened steel that has been precision ground. The clamp is also made from hardened steel. Each V-block is furnished with two clamp screws.
- Manufacturer Name:Â L.S. StarrettCapacity:Â Max. Dia. 4" Min. Dia. 9/16"Number of Blocks:Â 1Size:Â 3 x 5-1/4 x 3-3/8
- ‎
- This V-block will handle round work up to a diameter of 4 with the same precision and accuracy of other Starrett V-blocks. The block can be used on its side or on its end for machining or inspection, with no interference from the clamp. A reversible swing-away style clamp that clamps against almost any shape of product part is furnished with the unit. The three tapped hole positions in the V-block for the clamp allows the clamp to be positioned at either end or at the center of the V-block. Two tapped holes in one end of the V-block provide for mounting it perpendicular to a face plate. Clearance holes in the bottom provide for mounting the V-block to angle plates or other fixturing. The block is 5–1/4 wide, 3 , high and 3–3/8 long and made of hardened steel that has been precision ground. The clamp is also made from hardened steel. Each V-block is furnished with two clamp screws.
Have a Question About a Product?
Our team is here to answer all your questions and provide the detailed information and support you need to make product decisions.
Contact Us$1,104.16
 / EA