Sandvik Coromant 6241008 CoroDrill 460 High Performance Jobber Length Drill Bit, 0.441 in Drill - Decimal Inch, 140 deg Point, Solid Carbide, PVD-TiAlN Coated

Pricing Notice

Due to evolving trade policies, product prices may be subject to change. For details, please refer to our Terms of Sale. We remain committed to offering competitive pricing and exceptional service.

Terms of Sale

Have a Question About a Product?

Our team is here to answer all your questions and provide the detailed information and support you need to make product decisions.

Contact Us

Sandvik Coromant

Sandvik Coromant 6241008 CoroDrill 460 High Performance Jobber Length Drill Bit, 0.441 in Drill - Decimal Inch, 140 deg Point, Solid Carbide, PVD-TiAlN Coated

ManufacturerSandvik Coromant

Part #826214132

MFG #6241008

Sandvik Coromant Jobber Length Drill Bit, High Performance, Series: CoroDrill 460, Imperial, 0.441 in Drill - Decimal Inch, 4.646 in Overall Length, 5XD Cutting Depth, 2 Flutes, SSK Flute, 2.795 in Flute Length, 0.472 in Shank, Cylindrical Shank, 140 deg Point, Split Point, Right Hand Cutting Direction, Solid Carbide Cutting Edge, Yes Through Coolant, Solid Carbide, PVD-TiAlN Coated, Applicable Materials: Unalloyed Steel, High Carbon Steel, Low/High Alloy Steel, Steel Castings, Stainless Steel, Malleable Cast Iron, Gray Cast Iron, Nodular Cast Iron, Aluminum Based Alloys, Copper Based Alloys, Titanium, Extra Hard Steel and Chilled Cast Iron

$266.33

/ EA

QTY

Knowledgeable Product TeamBenefit from our experienced team, ready to assist you with expert product knowledge and ensure a seamless shopping experience.

Manufacturer Name: Sandvik Coromant

Applicable Materials: Unalloyed Steel, High Carbon Steel, Low/High Alloy Steel, Steel Castings, Stainless Steel, Malleable Cast Iron, Gray Cast Iron, Nodular Cast Iron, Aluminum Based Alloys, Copper Based Alloys, Titanium, Extra Hard Steel and Chilled Cast Iron

Country of Origin: CN

Cutting Depth: 5XD

Cutting Direction: Right Hand

Cutting Edge Material: Solid Carbide

Drill Diameter Measurement System: Imperial

Drill Size - Decimal Inch: 0.441 in

Finish: PVD-TiAlN Coated

Flute Length: 2.795 in

Flute Type: SSK

Manufacturer Name: Sandvik Coromant

Material: Solid Carbide

Number of Flutes: 2

Overall Length: 4.646 in

Point Angle: 140 deg

Point Type: Split

Series: CoroDrill 460

Shank Size: 0.472 in

Shank Type: Cylindrical

Through Coolant (Yes/No): Yes

Type: High Performance

High productivity and consistent tool life
Exceptional value with no compromise on quality
Excellent hole quality
Outstanding coating and flute design leading to smooth and efficient chip evacuation
Reduced tooling costs
Can be reground up to three times, extending tool life even further
Coating with a special finishing treatment to reduce coefficient of friction
Strong web design provides excellent cross-sectional strength that, combined with increased flute volume, enhances chip evacuation
Point angle of 140 deg ideally suited for multi-application drilling, with good centering capabilities and low thrust force design

CoroDrill 460-XM is a multi-application, high performance drill that can be used across a wide range of materials. This drill provides high capacity utilization, flexibility and versatility. With one drill for all materials, stock holding can be reduced and greater machine flexibility is offered leading to reduced set-up time.

DIN 6535 HA/6537 L

SDS

Manufacturer Name: Sandvik Coromant

Applicable Materials: Unalloyed Steel, High Carbon Steel, Low/High Alloy Steel, Steel Castings, Stainless Steel, Malleable Cast Iron, Gray Cast Iron, Nodular Cast Iron, Aluminum Based Alloys, Copper Based Alloys, Titanium, Extra Hard Steel and Chilled Cast Iron

Country of Origin: CN

Cutting Depth: 5XD

Cutting Direction: Right Hand

Cutting Edge Material: Solid Carbide

Drill Diameter Measurement System: Imperial

Drill Size - Decimal Inch: 0.441 in

Finish: PVD-TiAlN Coated

Flute Length: 2.795 in

Flute Type: SSK

Manufacturer Name: Sandvik Coromant

Material: Solid Carbide

Number of Flutes: 2

Overall Length: 4.646 in

Point Angle: 140 deg

Point Type: Split

Series: CoroDrill 460

Shank Size: 0.472 in

Shank Type: Cylindrical

Through Coolant (Yes/No): Yes

Type: High Performance

High productivity and consistent tool life
Exceptional value with no compromise on quality
Excellent hole quality
Outstanding coating and flute design leading to smooth and efficient chip evacuation
Reduced tooling costs
Can be reground up to three times, extending tool life even further
Coating with a special finishing treatment to reduce coefficient of friction
Strong web design provides excellent cross-sectional strength that, combined with increased flute volume, enhances chip evacuation
Point angle of 140 deg ideally suited for multi-application drilling, with good centering capabilities and low thrust force design

CoroDrill 460-XM is a multi-application, high performance drill that can be used across a wide range of materials. This drill provides high capacity utilization, flexibility and versatility. With one drill for all materials, stock holding can be reduced and greater machine flexibility is offered leading to reduced set-up time.

DIN 6535 HA/6537 L

SDS

Pricing Notice

Due to evolving trade policies, product prices may be subject to change. For details, please refer to our Terms of Sale. We remain committed to offering competitive pricing and exceptional service.

Terms of Sale

Have a Question About a Product?

Our team is here to answer all your questions and provide the detailed information and support you need to make product decisions.

Contact Us

Sandvik CoromantSandvik Coromant 6241008 CoroDrill 460 High Performance Jobber Length Drill Bit, 0.441 in Drill - Decimal Inch, 140 deg Point, Solid Carbide, PVD-TiAlN Coated

Part #:826214132

MFG #:6241008

$266.33

/ EA

QTY