TPI F2F5103N 5100 1/3-Phase Fan Forced Standard Unit Heater, 11.2 Btu/hr Capacity, 208 V AC, 3.3 kW Power Rating
Pricing Notice
Due to evolving trade policies, product prices may be subject to change. For details, please refer to our Terms of Sale. We remain committed to offering competitive pricing and exceptional service.
Terms of SaleHave a Question About a Product?
Our team is here to answer all your questions and provide the detailed information and support you need to make product decisions.
Contact UsTPI F2F5103N 5100 1/3-Phase Fan Forced Standard Unit Heater, 11.2 Btu/hr Capacity, 208 V AC, 3.3 kW Power Rating
ManufacturerTPI
Part #633464568
MFG #F2F5103N
UPC #686334645683
TPI Unit Heater, 1/3-Phase Fan Forced Standard, Series: 5100, 11.2 Btu/hr, 208 V AC, 11.9/6.9 A, 50/60 Hz, 3.3 kW, 400 cfm, 26 deg F, Wall Mount, 9 ft Horizontal/Vertical Mounting Height, Steel, Powder Coated, 14-15/32 in W x 6-1/2 in D x 17-3/4 in H
$887.03
 / EAKnowledgeable Product TeamBenefit from our experienced team, ready to assist you with expert product knowledge and ensure a seamless shopping experience.
- Manufacturer Name:Â TPI CorporationAmperage Rating:Â 11.9/6.9 ACapacity:Â 11.2 Btu/hrCountry of Origin:Â USDimensions:Â 14-15/32 in W x 6-1/2 in D x 17-3/4 in HFinish:Â Powder CoatedFlow Rate:Â 400 cfmFrequency Rating:Â 50/60 HzManufacturer Name:Â TPI CorporationMaterial:Â SteelMounting Height:Â 9 ft Horizontal/VerticalMounting Type:Â WallPower Rating:Â 3.3 kWSeries:Â 5100Temperature Rating:Â 26 deg FType:Â 1/3-Phase Fan Forced StandardVoltage Rating:Â 208 VAC
- Heavy 18 ga welded steel cabinet with powder coated beige and brown two tone finish and control compartment housing a master terminal board with a hinged and latched access door, simplifying wiring, installation, and maintenance
- Copper clad steel sheath element with continuously brazed stell fins formed to allow side draw through air flow
- Equipped with automatic reset type limit controls to de-energize the heater should an over-temperature situation occur
- Fan and Motor, Totally enclosed, single speed, single phase permanently lubricated, thermally protected motor with unit bearings
- Motors mounted with rubber insulators to minimize vibration and noise
- TPI Unit Heater, 1/3-Phase Fan Forced Standard, Series: 5100, 11.2 Btu/hr, 208 V AC, 11.9/6.9 A, 50/60 Hz, 3.3 kW, 400 cfm, 26 deg F, Wall Mount, 9 ft Horizontal/Vertical Mounting Height, Steel, Powder Coated, 14-15/32 in W x 6-1/2 in D x 17-3/4 in H
- ARRA Compliant|Buy American Act Compliant|cETLus Listed|ABS Approved|PROP65: This product can expose you to chemicals including nickel which is known to the State of California to cause cancer, and chromium, which is known to the State of California to cause birth defects and/or reproductive harm. For more information go to www.P65Warnings.cs.gov
- Manufacturer Name:Â TPI CorporationAmperage Rating:Â 11.9/6.9 ACapacity:Â 11.2 Btu/hrCountry of Origin:Â USDimensions:Â 14-15/32 in W x 6-1/2 in D x 17-3/4 in HFinish:Â Powder CoatedFlow Rate:Â 400 cfmFrequency Rating:Â 50/60 HzManufacturer Name:Â TPI CorporationMaterial:Â SteelMounting Height:Â 9 ft Horizontal/VerticalMounting Type:Â WallPower Rating:Â 3.3 kWSeries:Â 5100Temperature Rating:Â 26 deg FType:Â 1/3-Phase Fan Forced StandardVoltage Rating:Â 208 VAC
- Heavy 18 ga welded steel cabinet with powder coated beige and brown two tone finish and control compartment housing a master terminal board with a hinged and latched access door, simplifying wiring, installation, and maintenance
- Copper clad steel sheath element with continuously brazed stell fins formed to allow side draw through air flow
- Equipped with automatic reset type limit controls to de-energize the heater should an over-temperature situation occur
- Fan and Motor, Totally enclosed, single speed, single phase permanently lubricated, thermally protected motor with unit bearings
- Motors mounted with rubber insulators to minimize vibration and noise
- TPI Unit Heater, 1/3-Phase Fan Forced Standard, Series: 5100, 11.2 Btu/hr, 208 V AC, 11.9/6.9 A, 50/60 Hz, 3.3 kW, 400 cfm, 26 deg F, Wall Mount, 9 ft Horizontal/Vertical Mounting Height, Steel, Powder Coated, 14-15/32 in W x 6-1/2 in D x 17-3/4 in H
- ARRA Compliant|Buy American Act Compliant|cETLus Listed|ABS Approved|PROP65: This product can expose you to chemicals including nickel which is known to the State of California to cause cancer, and chromium, which is known to the State of California to cause birth defects and/or reproductive harm. For more information go to www.P65Warnings.cs.gov
Pricing Notice
Due to evolving trade policies, product prices may be subject to change. For details, please refer to our Terms of Sale. We remain committed to offering competitive pricing and exceptional service.
Terms of SaleHave a Question About a Product?
Our team is here to answer all your questions and provide the detailed information and support you need to make product decisions.
Contact UsTPI CorporationTPI F2F5103N 5100 1/3-Phase Fan Forced Standard Unit Heater, 11.2 Btu/hr Capacity, 208 V AC, 3.3 kW Power Rating
Part #:633464568
MFG #:F2F5103N$887.03
 / EA