SGS 46852 Z-Carb-AP Z1MPCR Center Cutting High Performance Regular Length Single End Variable Rake End Mill, 4 mm Dia Cutter, 0.3 mm Corner Radius, 11 mm Length of Cut, 4 Flutes, 6 mm Dia Shank, 57 mm OAL, TX Coated

Pricing Notice

Due to evolving trade policies, product prices may be subject to change. For details, please refer to our Terms of Sale. We remain committed to offering competitive pricing and exceptional service.

Terms of Sale

Have a Question About a Product?

Our team is here to answer all your questions and provide the detailed information and support you need to make product decisions.

Contact Us

KYOCERA SGS Precision tools, Inc.

SGS 46852 Z-Carb-AP Z1MPCR Center Cutting High Performance Regular Length Single End Variable Rake End Mill, 4 mm Dia Cutter, 0.3 mm Corner Radius, 11 mm Length of Cut, 4 Flutes, 6 mm Dia Shank, 57 mm OAL, TX Coated

ManufacturerSGS

Part #069946852

MFG #46852

UPC #691781468525

SGS End Mill, Center Cutting High Performance Regular Length Single End Variable Rake, Series: Z-Carb-AP Z1MPCR, 4 mm Diameter Cutter, 0.3 mm Corner Radius, 57 mm Overall Length, 11 mm Length of Cut, 4 Flutes, Right Spiral Flute, 6 mm Shank Diameter, Right Hand Cutting Direction, 35 to 38 deg Helix Angle, Straight Shank, 1.807 in Shank Length, Solid Carbide, TX Coated

$34.78

/ EA

QTY

Knowledgeable Product TeamBenefit from our experienced team, ready to assist you with expert product knowledge and ensure a seamless shopping experience.

Manufacturer Name: KYOCERA SGS Precision tools, Inc.

Corner Radius: 0.3 mm

Country of Origin: US

Cutter Diameter: 4 mm

Cutting Direction: Right Hand

Finish: TX Coated

Flute Type: Right Spiral

Helix Angle: 35 to 38 deg

Length of Cut: 11 mm

Manufacturer Name: KYOCERA Precision Tools, KYOCERA SGS Precision Tools, KYOCERA SGS Precision tools, Inc.

Material: Solid Carbide

Number of Flutes: 4

Overall Length: 57 mm

Series: Z-Carb-AP Z1MPCR

Shank Diameter: 6 mm

Shank Length: 1.807 in

Shank Type: Straight

Type: Center Cutting High Performance Regular Length Single End Variable Rake

Variable rake geometry alters and controls the cutting dynamic taking chatter suppression to an unprecedented level
Unequal flute spacing helps to disrupt the rhythmic pattern created by the cutting edge helping to suppress damaging harmonics
Enhanced corner geometry with tight tolerance corner radii
Recommended for materials

With conventional end mills, the cutting teeth entering and exiting the material creates a natural rhythm that results in damaging harmonics. Harmonics produce a frequency that resonates through the entire tool, resulting in one of the most damaging forms of cutter wear known as chatter. Chatter degrades the quality of your finish. Until now, your only choice was to adjust your operating parameters to account for the limitations of your conventional end mill. With its patented, one of a kind geometry, the Z-Carb AP offers three stages of chatter suppression, resulting in the quietest, most stable milling experience available.

Manufacturer Name: KYOCERA SGS Precision tools, Inc.

Corner Radius: 0.3 mm

Country of Origin: US

Cutter Diameter: 4 mm

Cutting Direction: Right Hand

Finish: TX Coated

Flute Type: Right Spiral

Helix Angle: 35 to 38 deg

Length of Cut: 11 mm

Manufacturer Name: KYOCERA Precision Tools, KYOCERA SGS Precision Tools, KYOCERA SGS Precision tools, Inc.

Material: Solid Carbide

Number of Flutes: 4

Overall Length: 57 mm

Series: Z-Carb-AP Z1MPCR

Shank Diameter: 6 mm

Shank Length: 1.807 in

Shank Type: Straight

Type: Center Cutting High Performance Regular Length Single End Variable Rake

Variable rake geometry alters and controls the cutting dynamic taking chatter suppression to an unprecedented level
Unequal flute spacing helps to disrupt the rhythmic pattern created by the cutting edge helping to suppress damaging harmonics
Enhanced corner geometry with tight tolerance corner radii
Recommended for materials

With conventional end mills, the cutting teeth entering and exiting the material creates a natural rhythm that results in damaging harmonics. Harmonics produce a frequency that resonates through the entire tool, resulting in one of the most damaging forms of cutter wear known as chatter. Chatter degrades the quality of your finish. Until now, your only choice was to adjust your operating parameters to account for the limitations of your conventional end mill. With its patented, one of a kind geometry, the Z-Carb AP offers three stages of chatter suppression, resulting in the quietest, most stable milling experience available.

Pricing Notice

Due to evolving trade policies, product prices may be subject to change. For details, please refer to our Terms of Sale. We remain committed to offering competitive pricing and exceptional service.

Terms of Sale

Have a Question About a Product?

Our team is here to answer all your questions and provide the detailed information and support you need to make product decisions.

Contact Us

KYOCERA SGS Precision tools, Inc.SGS 46852 Z-Carb-AP Z1MPCR Center Cutting High Performance Regular Length Single End Variable Rake End Mill, 4 mm Dia Cutter, 0.3 mm Corner Radius, 11 mm Length of Cut, 4 Flutes, 6 mm Dia Shank, 57 mm OAL, TX Coated

Part #:069946852

MFG #:46852

$34.78

/ EA

QTY