Master STAGES WHAMEX-1G Whamex Machine Tool Sump/System Cleaner, 1 gal Jug, Liquid, Yellow, Mild
Pricing Notice
Due to evolving trade policies, product prices may be subject to change. For details, please refer to our Terms of Sale. We remain committed to offering competitive pricing and exceptional service.
Terms of SaleHave a Question About a Product?
Our team is here to answer all your questions and provide the detailed information and support you need to make product decisions.
Contact UsMaster STAGES WHAMEX-1G Whamex Machine Tool Sump/System Cleaner, 1 gal Jug, Liquid, Yellow, Mild
ManufacturerMaster STAGES
Part #037900004
MFG #WHAMEX/1G
UPC #641238027294
Master STAGES Machine Tool Sump/System Cleaner, Series: Whamex, 1 gal, Jug, Liquid, Yellow, Mild, 1.026 to 1.134 Specific Gravity
$56.84
 / EAKnowledgeable Product TeamBenefit from our experienced team, ready to assist you with expert product knowledge and ensure a seamless shopping experience.
- Manufacturer Name:Â Master Fluid SolutionsColor:Â YellowContainer Size:Â 1 galContainer Type:Â JugCountry of Origin:Â USForm:Â LiquidManufacturer Name:Â Master Fluid SolutionsOdor/Scent:Â MildSeries:Â WhamexSpecific Gravity:Â 1.026 to 1.134
- A very specialized formula that draws on Master Chemicals knowledge of coolant formulation and many years of hands-on experience in machine cleanouts
- Quickly breaks down and lifts off insoluble scum deposits hidden in lines and difficult to reach areas - getting rid of these residues is one of the best ways to extend coolant life in your system
- Very hard water tolerant allowing it to be effective in raw water or used coolant
- Environmental approvals are simplified because Whamex contains no nitrites, phosphates, barium, phenols, or butyl cellusolve; this formula has very low V.O.C. content and no SARA 313 reportable ingredients
- When used as directed below, this product is compatible with TRIM brand synthetic, semisynthetic, and soluble oil coolants, as well as most competitive coolants
- Will remove heavy soils from machines without affecting paints, coatings, seals, hoses, or skirting, and it wont leave a slippery residue
- Short-term corrosion inhibitors prevent flash rusting of machine surfaces and ways
- PREFERRED METHOD FOR CLEANING MACHINE TOOLS AND CENTRAL SYSTEMS: Add 1%-3% Whamex into the machine sump and run machine as normal for at least 24 hours or more for best results, if the machine runs high pressure through-the-tool for significant amounts of time, the cleaner may cause some foam, keep a defoamer, such as Master STAGES DF1 or TRIM TC 239, available during this process
- After the Whamex has circulated for at least 24 hours, pump out the sump and remove all chips, sludge, residue and swarf. Remember to clean out overflow areas and flumes
- Spray down the machine with a 10%-15% Whamex and water solution using The Whammer or a general-purpose garden sprayer. Scrub out the chips, sludge, and any other residues from all interior, exterior, tool changer areas including high-pressure sumps and filter canisters
- 10.6 at 2% Working Solution, 10.5 at 5% Working Solution pH range
- 215 deg F flash point
- 120 deg F temperature
- 12 Months shelf life
- Manufacturer Name:Â Master Fluid SolutionsColor:Â YellowContainer Size:Â 1 galContainer Type:Â JugCountry of Origin:Â USForm:Â LiquidManufacturer Name:Â Master Fluid SolutionsOdor/Scent:Â MildSeries:Â WhamexSpecific Gravity:Â 1.026 to 1.134
- A very specialized formula that draws on Master Chemicals knowledge of coolant formulation and many years of hands-on experience in machine cleanouts
- Quickly breaks down and lifts off insoluble scum deposits hidden in lines and difficult to reach areas - getting rid of these residues is one of the best ways to extend coolant life in your system
- Very hard water tolerant allowing it to be effective in raw water or used coolant
- Environmental approvals are simplified because Whamex contains no nitrites, phosphates, barium, phenols, or butyl cellusolve; this formula has very low V.O.C. content and no SARA 313 reportable ingredients
- When used as directed below, this product is compatible with TRIM brand synthetic, semisynthetic, and soluble oil coolants, as well as most competitive coolants
- Will remove heavy soils from machines without affecting paints, coatings, seals, hoses, or skirting, and it wont leave a slippery residue
- Short-term corrosion inhibitors prevent flash rusting of machine surfaces and ways
- PREFERRED METHOD FOR CLEANING MACHINE TOOLS AND CENTRAL SYSTEMS: Add 1%-3% Whamex into the machine sump and run machine as normal for at least 24 hours or more for best results, if the machine runs high pressure through-the-tool for significant amounts of time, the cleaner may cause some foam, keep a defoamer, such as Master STAGES DF1 or TRIM TC 239, available during this process
- After the Whamex has circulated for at least 24 hours, pump out the sump and remove all chips, sludge, residue and swarf. Remember to clean out overflow areas and flumes
- Spray down the machine with a 10%-15% Whamex and water solution using The Whammer or a general-purpose garden sprayer. Scrub out the chips, sludge, and any other residues from all interior, exterior, tool changer areas including high-pressure sumps and filter canisters
- 10.6 at 2% Working Solution, 10.5 at 5% Working Solution pH range
- 215 deg F flash point
- 120 deg F temperature
- 12 Months shelf life
Pricing Notice
Due to evolving trade policies, product prices may be subject to change. For details, please refer to our Terms of Sale. We remain committed to offering competitive pricing and exceptional service.
Terms of SaleHave a Question About a Product?
Our team is here to answer all your questions and provide the detailed information and support you need to make product decisions.
Contact UsMaster Fluid SolutionsMaster STAGES WHAMEX-1G Whamex Machine Tool Sump/System Cleaner, 1 gal Jug, Liquid, Yellow, Mild
Part #:037900004
MFG #:WHAMEX/1G$56.84
 / EA