Fluke VCHEK FLUKE-113 Utility Digital Multimeter, 600 VDC/VAC, 60 kOhm Measuring, 6/60/600 VAC/VDC, 600 Ohm/6/60 kOhm, Backlight/Digital Display

Pricing Notice

Due to evolving trade policies, product prices may be subject to change. For details, please refer to our Terms of Sale. We remain committed to offering competitive pricing and exceptional service.

Terms of Sale

Have a Question About a Product?

Our team is here to answer all your questions and provide the detailed information and support you need to make product decisions.

Fluke

Fluke VCHEK FLUKE-113 Utility Digital Multimeter, 600 VDC/VAC, 60 kOhm Measuring, 6/60/600 VAC/VDC, 600 Ohm/6/60 kOhm, Backlight/Digital Display

ManufacturerFluke

Part #596943452

MFG #3078875

UPC #095969434522

Fluke VCHEK Digital Multimeter, Utility, 600 VDC/VAC, 60 kOhm Measuring, 6/60/600 VAC/VDC, 600 Ohm/6/60 kOhm Resistance, Safety Rating: CAT III 600 VAC/VDC, CAT IV 300 VAC/VDC Pollution deg 2, 1000 nF, 10/100/9999 uF Capacitance, 2% + 3 (45 to 500 Hz), 4% +3 (500 Hz to 1 kHz) VAC Accuracy, Backlight/Digital Display, 9 VDC Alkaline/ANSI 1604A/IEC 6F22 Battery, No Peak Hold, Yes Diode Test, 1.81 in L x 3.35 in W x 6.58 in H Dimensions, 14 to 122 deg F, Hard Plastic

$220.54

/ EA

QTY

Knowledgeable Product TeamBenefit from our experienced team, ready to assist you with expert product knowledge and ensure a seamless shopping experience.

Manufacturer Name: Fluke

Accuracy: 2% + 3 (45 to 500 Hz), 4% +3 (500 Hz to 1 kHz) VAC

Battery Type: 9 VDC Alkaline/ANSI 1604A/IEC 6F22

Capacitance: 1000 nF, 10/100/9999 uF

Dimensions: 1.81 in L x 3.35 in W x 6.58 in H

Diode Test: Yes

Display Type: Backlight/Digital

Manufacturer Name: Fluke

Material: Hard Plastic

Measuring Range: 600 VDC/VAC, 60 kOhm

Peak Hold: No

Resistance: 600 Ohm/6/60 kOhm

Safety Rating: CAT III 600 VAC/VDC, CAT IV 300 VAC/VDC Pollution deg 2

Temperature Rating: 14 to 122 deg F

Type: Utility

Voltage Rating: 6/60/600 VAC/VDC

Fluke 113 Utility Multi-meter TL75 Test Leads, (1) 9 VDC Battery and Printed Users Manual

VCHEK LoZ low impedance measurement function to simultaneously test for voltage or continuity
True-RMS for accurate AC measurements on non-linear loads
Large backlit display allows for easy visibility in low lit areas
Record signal fluctuations using the minimum maximum function
Diode test for testing general purpose germanium, silicon and power diodes
Integral holster with probe holders for easy storage
Auto and manual ranging for added user functionality
Meets measurement category CAT III 600 VAC and category IV 300 VAC standards for a higher level of safety
2% 3 (45 to 500 Hz), 4% 3 (500 Hz to 1 kHz) accuracy
Resistance range - 600 Ohm with accuracy of +/-(0.9% 2), 6 kOhm, 60 kOhm with accuracy of +/-(0.9% 1)
Capacitance range 1000 nF, 10 uF, 100 uF, 100 uF to 1000 uF with accuracy of +/-(1.9% 2), greater than 1000 uF with accuracy of +/-(5% 20)
300 hr typical alkaline, without backlight
3-3/4 digits 6000 count display

For basic electrical tests

Fluke 113 Utility Multi-meter TL75 Test Leads, (1) 9 VDC Battery and Printed Users Manual

Catalog

Instruction/Installation Manual

Specification Sheet

Manufacturer Name: Fluke

Accuracy: 2% + 3 (45 to 500 Hz), 4% +3 (500 Hz to 1 kHz) VAC

Battery Type: 9 VDC Alkaline/ANSI 1604A/IEC 6F22

Capacitance: 1000 nF, 10/100/9999 uF

Dimensions: 1.81 in L x 3.35 in W x 6.58 in H

Diode Test: Yes

Display Type: Backlight/Digital

Manufacturer Name: Fluke

Material: Hard Plastic

Measuring Range: 600 VDC/VAC, 60 kOhm

Peak Hold: No

Resistance: 600 Ohm/6/60 kOhm

Safety Rating: CAT III 600 VAC/VDC, CAT IV 300 VAC/VDC Pollution deg 2

Temperature Rating: 14 to 122 deg F

Type: Utility

Voltage Rating: 6/60/600 VAC/VDC

Fluke 113 Utility Multi-meter TL75 Test Leads, (1) 9 VDC Battery and Printed Users Manual

VCHEK LoZ low impedance measurement function to simultaneously test for voltage or continuity
True-RMS for accurate AC measurements on non-linear loads
Large backlit display allows for easy visibility in low lit areas
Record signal fluctuations using the minimum maximum function
Diode test for testing general purpose germanium, silicon and power diodes
Integral holster with probe holders for easy storage
Auto and manual ranging for added user functionality
Meets measurement category CAT III 600 VAC and category IV 300 VAC standards for a higher level of safety
2% 3 (45 to 500 Hz), 4% 3 (500 Hz to 1 kHz) accuracy
Resistance range - 600 Ohm with accuracy of +/-(0.9% 2), 6 kOhm, 60 kOhm with accuracy of +/-(0.9% 1)
Capacitance range 1000 nF, 10 uF, 100 uF, 100 uF to 1000 uF with accuracy of +/-(1.9% 2), greater than 1000 uF with accuracy of +/-(5% 20)
300 hr typical alkaline, without backlight
3-3/4 digits 6000 count display

For basic electrical tests

Fluke 113 Utility Multi-meter TL75 Test Leads, (1) 9 VDC Battery and Printed Users Manual

Catalog

Instruction/Installation Manual

Specification Sheet

Pricing Notice

Due to evolving trade policies, product prices may be subject to change. For details, please refer to our Terms of Sale. We remain committed to offering competitive pricing and exceptional service.

Terms of Sale

Have a Question About a Product?

Our team is here to answer all your questions and provide the detailed information and support you need to make product decisions.

FlukeFluke VCHEK FLUKE-113 Utility Digital Multimeter, 600 VDC/VAC, 60 kOhm Measuring, 6/60/600 VAC/VDC, 600 Ohm/6/60 kOhm, Backlight/Digital Display

Part #:596943452

MFG #:3078875

$220.54

/ EA

QTY