Standard Abrasives 7010369357 Eyelet High Strength Cross Buff, 2 in Dia Buff, Coarse Grade, 2 Plys, 3/4 in W Face
Pricing Notice
Due to evolving trade policies, product prices may be subject to change. For details, please refer to our Terms of Sale. We remain committed to offering competitive pricing and exceptional service.
Terms of SaleHave a Question About a Product?
Our team is here to answer all your questions and provide the detailed information and support you need to make product decisions.
Contact UsStandard Abrasives 7010369357 Eyelet High Strength Cross Buff, 2 in Dia Buff, Coarse Grade, 2 Plys, 3/4 in W Face
ManufacturerStandard Abrasives
Part #111537157
MFG #7010369357
UPC #051115371578
Standard Abrasives, 7010369357, Cross Buff, Eyelet High Strength, 1/4-20 Thread, 2 in Buff Diameter, Aluminum Oxide, Coarse Grade, 3/4 in Face Width, 12000 rpm Maximum, 2 Ply
$8.52
 / EAKnowledgeable Product TeamBenefit from our experienced team, ready to assist you with expert product knowledge and ensure a seamless shopping experience.
- Manufacturer Name:Â 3MBuff Diameter:Â 2 inCountry of Origin:Â USFace Width:Â 3/4 inGrade:Â CoarseManufacturer Name:Â 3MMaterial:Â Aluminum OxideMaximum Speed:Â 12000 rpmNumber of Plys:Â 2Thread Size:Â 1/4-20Type:Â Eyelet High Strength
- Unique abrasive design enables buff to fit inside hard to reach areas
- Open web buff responds to surface imperfections with minimal gouging or marring of the substrate, sustaining part geometry
- Tough nylon face removes surface contaminants while resisting chatter or gouging of the workpiece
- Resin coated surface runs cool and is waterproof for use with lubricants
- Available in coarse (green) and medium (blue) abrasive grades to help produce satin finishes on soft metals
- Our standard Abrasives buff and blend cross buff HS is uniquely designed to clean and polish hard to reach areas like the internal diameters of pipes and tubing. The buff and blend HS material allows removing surface contaminants without eliminating critical detail or gouging the workpiece. The Standard Abrasives buff and blend cross buff HS is the go to product for stubborn surface areas that require a unique, tough construction. While discs or wheels may be unable to get inside an arrow pipe or tube, our cross buff HS was designed to do just that. The abrasive fingers are spring like and bend and move to accommodate the inner diameter of the workpiece. They refine deep scratches and defects without compromising the geometry of the part. Buff and blend high strength products are made from tough, resin reinforced nylon fiber with aluminum oxide abrasive grain. The durable high strength construction of mounted cross buff provides aggressive action for the toughest applications and provides greater tear-resistance, perfect for deburring or final finishing on irregularly shaped parts in tight spaces. The abrasive material on the cross buff HS is a strong, all purpose material for tough cleaning and polishing jobs. The aluminum oxide mineral cuts sharp while still delivering a fine polish. Cross buff HS comes in both coarse and medium grades. Typically, a medium grade is useful when a soft scratch pattern is desired, whereas a coarse grade delivers a more aggressive scratch. Given its versatility, this abrasive is well suited for removing surface oxidation, rust and surface coatings for part inspection, as well as surface preparation prior to coating. It can help remove corrosion on steel rule and kirksite dies. Its also great for polishing round and square tubing, valve spools, molds, dies and inside diameters of lifter bores, valve bodies and brake cylinders. In addition to the unique design of our standard Abrasives buff and blend cross buff HS, the open web construction also adds a level of sponginess and flexibility. This open web material is created by combining non-woven nylon strands and abrasive mineral with resin bonding material. Gaps between the nylon fibers allow unwanted swarf to escape, enhancing load-resistance and efficiency. As the abrasive is less likely to clog with debris, the mineral keeps cutting sharper, longer. The open web material resin bonding are also waterproof and can be used with lubricants, which help to keep the abrasive running cool and wash away swarf. The load-resistant properties of the web, combined with the swarf cleaning action of the lubricant, help to prevent workpiece contamination. As debris clears away, the likelihood of particles smearing or blemishing the substrate decreases.
- Manufacturer Name:Â 3MBuff Diameter:Â 2 inCountry of Origin:Â USFace Width:Â 3/4 inGrade:Â CoarseManufacturer Name:Â 3MMaterial:Â Aluminum OxideMaximum Speed:Â 12000 rpmNumber of Plys:Â 2Thread Size:Â 1/4-20Type:Â Eyelet High Strength
- Unique abrasive design enables buff to fit inside hard to reach areas
- Open web buff responds to surface imperfections with minimal gouging or marring of the substrate, sustaining part geometry
- Tough nylon face removes surface contaminants while resisting chatter or gouging of the workpiece
- Resin coated surface runs cool and is waterproof for use with lubricants
- Available in coarse (green) and medium (blue) abrasive grades to help produce satin finishes on soft metals
- Our standard Abrasives buff and blend cross buff HS is uniquely designed to clean and polish hard to reach areas like the internal diameters of pipes and tubing. The buff and blend HS material allows removing surface contaminants without eliminating critical detail or gouging the workpiece. The Standard Abrasives buff and blend cross buff HS is the go to product for stubborn surface areas that require a unique, tough construction. While discs or wheels may be unable to get inside an arrow pipe or tube, our cross buff HS was designed to do just that. The abrasive fingers are spring like and bend and move to accommodate the inner diameter of the workpiece. They refine deep scratches and defects without compromising the geometry of the part. Buff and blend high strength products are made from tough, resin reinforced nylon fiber with aluminum oxide abrasive grain. The durable high strength construction of mounted cross buff provides aggressive action for the toughest applications and provides greater tear-resistance, perfect for deburring or final finishing on irregularly shaped parts in tight spaces. The abrasive material on the cross buff HS is a strong, all purpose material for tough cleaning and polishing jobs. The aluminum oxide mineral cuts sharp while still delivering a fine polish. Cross buff HS comes in both coarse and medium grades. Typically, a medium grade is useful when a soft scratch pattern is desired, whereas a coarse grade delivers a more aggressive scratch. Given its versatility, this abrasive is well suited for removing surface oxidation, rust and surface coatings for part inspection, as well as surface preparation prior to coating. It can help remove corrosion on steel rule and kirksite dies. Its also great for polishing round and square tubing, valve spools, molds, dies and inside diameters of lifter bores, valve bodies and brake cylinders. In addition to the unique design of our standard Abrasives buff and blend cross buff HS, the open web construction also adds a level of sponginess and flexibility. This open web material is created by combining non-woven nylon strands and abrasive mineral with resin bonding material. Gaps between the nylon fibers allow unwanted swarf to escape, enhancing load-resistance and efficiency. As the abrasive is less likely to clog with debris, the mineral keeps cutting sharper, longer. The open web material resin bonding are also waterproof and can be used with lubricants, which help to keep the abrasive running cool and wash away swarf. The load-resistant properties of the web, combined with the swarf cleaning action of the lubricant, help to prevent workpiece contamination. As debris clears away, the likelihood of particles smearing or blemishing the substrate decreases.
Pricing Notice
Due to evolving trade policies, product prices may be subject to change. For details, please refer to our Terms of Sale. We remain committed to offering competitive pricing and exceptional service.
Terms of SaleHave a Question About a Product?
Our team is here to answer all your questions and provide the detailed information and support you need to make product decisions.
Contact Us3MStandard Abrasives 7010369357 Eyelet High Strength Cross Buff, 2 in Dia Buff, Coarse Grade, 2 Plys, 3/4 in W Face
Part #:111537157
MFG #:7010369357$8.52
 / EA