Standard Abrasives 7010330367 Eyelet General Purpose Cross Buff, 3/4 in Dia Buff, Fine Grade, 2 Plys, 3/8 in W Face
Pricing Notice
Due to evolving trade policies, product prices may be subject to change. For details, please refer to our Terms of Sale. We remain committed to offering competitive pricing and exceptional service.
Terms of SaleHave a Question About a Product?
Our team is here to answer all your questions and provide the detailed information and support you need to make product decisions.
Contact UsStandard Abrasives 7010330367 Eyelet General Purpose Cross Buff, 3/4 in Dia Buff, Fine Grade, 2 Plys, 3/8 in W Face
ManufacturerStandard Abrasives
Part #111537144
MFG #7010330367
UPC #051115371448
Standard Abrasives, 7010330367, Cross Buff, Eyelet General Purpose, #8-32 Thread, 3/4 in Buff Diameter, Aluminum Oxide, Fine Grade, 3/8 in Face Width, 20000 rpm Maximum, 2 Ply
$3.50
 / EAKnowledgeable Product TeamBenefit from our experienced team, ready to assist you with expert product knowledge and ensure a seamless shopping experience.
- Manufacturer Name:Â 3MBuff Diameter:Â 3/4 inCountry of Origin:Â USFace Width:Â 3/8 inGrade:Â FineManufacturer Name:Â 3MMaterial:Â Aluminum OxideMaximum Speed:Â 20000 rpmNumber of Plys:Â 2Thread Size:Â #8-32Type:Â Eyelet General Purpose
- Straight cylindrical shape enables operators to finish hard to reach areas
- Versatile range of minerals and grades are designed to meet specific project needs
- Arbor hole accommodates mandrel tool attachment, so abrasive may be used with various tools
- Multi-layer, multi-wear design enhances abrasive longevity and helps produce a consistent cut
- May be used with a lubricant to run cool and wash away swarf
- Open web buff responds to surface imperfections while minimizing gouging of the substrate
- Uniquely designed to clean and polish inside hard-to-reach areas like internal diameters of pipes and tubing
- Available in abrasive grades from very fine (vfn) to coarse (crs) to meet a wide variety of finish requirements
- Up to 500 abrasives per box minimizes replacement orders and helps lower operating costs
- Standard Abrasives buff and blend cross buff GP is your go to product for stubborn surface areas requiring a unique, conformable construction. While discs or wheels may be unable to get inside an arrow pipe or tube, our standard Abrasives buff and blend cross buff GP was designed to do just that. The abrasive fingers are spring like and bend and move to accommodate the inner diameter of the workpiece. They refine the surface while maintaining the geometry of the part. The abrasive material on cross buff GP is a great all purpose material for cleaning and polishing. The mineral cuts sharp while still delivering a fine polish. Cross buff GP comes in a range of grades from very fine (VFN) to coarse (CRS). Typically, very fine and fine grades are useful when a soft scratch pattern is desired, whereas a medium or coarse grade delivers a more aggressive scratch. Given its versatility, this abrasive is well suited for removing surface oxidation, rust and surface coatings for part inspection, as well as surface preparation prior to coating. It can help remove corrosion on steel rule and kirksite dies. Its also great for polishing round and square tubing, valve spools, molds, dies and inside diameters of lifter bores, valve bodies and brake cylinders. Standard Abrasives buff and blend cross buff GP fasten to a mandrel that in turn can be fastened to the power tool. The cross buffs attach to the mandrel with their 8-32 or 1/4-20 thread options. These versatile attachment options make it easier to securely mount and fasten the buff to the tool, helping to increase productivity. In addition to the unique design of the Standard Abrasives buff and blend cross buff GP, the open web construction also adds a level of sponginess and flexibility. This open web material is created by combining non-woven nylon strands and abrasive mineral with resin. Gaps between the nylon fibers allow unwanted swarf to escape, enhancing load-resistance. As the abrasive is less likely to clog with debris, the mineral keeps cutting sharper, longer. The open web material is waterproof and may be used with lubricants, which help to keep the abrasive running cool and wash away swarf. The load-resistant properties of the web, combined with the swarf cleaning action of the lubricant, help to prevent workpiece contamination. As debris clears away, the likelihood of the disc smearing or blemishing the substrate decreases.
- Manufacturer Name:Â 3MBuff Diameter:Â 3/4 inCountry of Origin:Â USFace Width:Â 3/8 inGrade:Â FineManufacturer Name:Â 3MMaterial:Â Aluminum OxideMaximum Speed:Â 20000 rpmNumber of Plys:Â 2Thread Size:Â #8-32Type:Â Eyelet General Purpose
- Straight cylindrical shape enables operators to finish hard to reach areas
- Versatile range of minerals and grades are designed to meet specific project needs
- Arbor hole accommodates mandrel tool attachment, so abrasive may be used with various tools
- Multi-layer, multi-wear design enhances abrasive longevity and helps produce a consistent cut
- May be used with a lubricant to run cool and wash away swarf
- Open web buff responds to surface imperfections while minimizing gouging of the substrate
- Uniquely designed to clean and polish inside hard-to-reach areas like internal diameters of pipes and tubing
- Available in abrasive grades from very fine (vfn) to coarse (crs) to meet a wide variety of finish requirements
- Up to 500 abrasives per box minimizes replacement orders and helps lower operating costs
- Standard Abrasives buff and blend cross buff GP is your go to product for stubborn surface areas requiring a unique, conformable construction. While discs or wheels may be unable to get inside an arrow pipe or tube, our standard Abrasives buff and blend cross buff GP was designed to do just that. The abrasive fingers are spring like and bend and move to accommodate the inner diameter of the workpiece. They refine the surface while maintaining the geometry of the part. The abrasive material on cross buff GP is a great all purpose material for cleaning and polishing. The mineral cuts sharp while still delivering a fine polish. Cross buff GP comes in a range of grades from very fine (VFN) to coarse (CRS). Typically, very fine and fine grades are useful when a soft scratch pattern is desired, whereas a medium or coarse grade delivers a more aggressive scratch. Given its versatility, this abrasive is well suited for removing surface oxidation, rust and surface coatings for part inspection, as well as surface preparation prior to coating. It can help remove corrosion on steel rule and kirksite dies. Its also great for polishing round and square tubing, valve spools, molds, dies and inside diameters of lifter bores, valve bodies and brake cylinders. Standard Abrasives buff and blend cross buff GP fasten to a mandrel that in turn can be fastened to the power tool. The cross buffs attach to the mandrel with their 8-32 or 1/4-20 thread options. These versatile attachment options make it easier to securely mount and fasten the buff to the tool, helping to increase productivity. In addition to the unique design of the Standard Abrasives buff and blend cross buff GP, the open web construction also adds a level of sponginess and flexibility. This open web material is created by combining non-woven nylon strands and abrasive mineral with resin. Gaps between the nylon fibers allow unwanted swarf to escape, enhancing load-resistance. As the abrasive is less likely to clog with debris, the mineral keeps cutting sharper, longer. The open web material is waterproof and may be used with lubricants, which help to keep the abrasive running cool and wash away swarf. The load-resistant properties of the web, combined with the swarf cleaning action of the lubricant, help to prevent workpiece contamination. As debris clears away, the likelihood of the disc smearing or blemishing the substrate decreases.
Pricing Notice
Due to evolving trade policies, product prices may be subject to change. For details, please refer to our Terms of Sale. We remain committed to offering competitive pricing and exceptional service.
Terms of SaleHave a Question About a Product?
Our team is here to answer all your questions and provide the detailed information and support you need to make product decisions.
Contact Us3MStandard Abrasives 7010330367 Eyelet General Purpose Cross Buff, 3/4 in Dia Buff, Fine Grade, 2 Plys, 3/8 in W Face
Part #:111537144
MFG #:7010330367$3.50
 / EA