Standard Abrasives 7100102941 Straight Cartridge Roll, 1/4 in Dia x 1-1/2 in OAL, 0.12 in Dia Pilot Hole, 120 Grit, Ceramic Alumina Abrasive
Pricing Notice
Due to evolving trade policies, product prices may be subject to change. For details, please refer to our Terms of Sale. We remain committed to offering competitive pricing and exceptional service.
Terms of SaleHave a Question About a Product?
Our team is here to answer all your questions and provide the detailed information and support you need to make product decisions.
Contact UsStandard Abrasives 7100102941 Straight Cartridge Roll, 1/4 in Dia x 1-1/2 in OAL, 0.12 in Dia Pilot Hole, 120 Grit, Ceramic Alumina Abrasive
ManufacturerStandard Abrasives
Part #111534331
MFG #7100102941
UPC #051115343315
Standard Abrasives, 7100102941, Cartridge Roll, Straight, 1/4 in Diameter Maximum Roll, 1-1/2 in Overall Length, 0.12 in Pilot Hole Diameter, 120 Grit, Fine Grade, Ceramic Alumina Abrasive
$0.99
 / RLKnowledgeable Product TeamBenefit from our experienced team, ready to assist you with expert product knowledge and ensure a seamless shopping experience.
- Manufacturer Name:Â 3MAbrasive Material:Â Ceramic AluminaCountry of Origin:Â USGrade:Â FineGrit:Â 120Manufacturer Name:Â 3MMaximum Roll Diameter:Â 1/4 inOverall Length:Â 1-1/2 inPilot Hole Diameter:Â 0.12 inType:Â Straight
- Versatile range of minerals and grades are designed to meet specific project needs
- Arbor hole accommodates mandrel tool attachment, so abrasive may be used with various tools
- Multi-layer, multi-wear design enhances abrasive longevity and helps produce a consistent cut
- Ideal for blending, deburring and polishing on ferrous and non-ferrous metals
- Straight cylindrical shape enables operators to finish hard-to-reach areas
- The unique design of our standard Abrasives ceramic cartridge roll makes it a good match for cutting in, over and around irregular surfaces and contours. Its cylindrical shape enables the abrasive to tackle hard to reach areas or spaces that, otherwise, might be difficult to access. Multi-layer design exposes fresh abrasive throughout the life of the roll. The multi-layered standard Abrasives ceramic cartridge roll is cylindrical in shape, which helps it roll centrifugally over irregular edges and contours. We engineer the product by rolling abrasive material into a tight cylinder resembling a small, circular barrel. This shape helps the abrasive work within nooks and crannies of the part. Cartridge rolls have an arbor hole to accommodate a mandrel tool attachment (sold separately), which attaches to a rotary tool such as a die grinder or drill. Mandrels come in different sizes to fit a variety of cartridge rolls. Together, the mandrel and roll enable the user to grind or finish hard to reach areas of a workpiece such as angles and curves. A mandrel links the cartridge to the power tool. Abrasive material on standard Abrasives ceramic cartridge roll is comprised of ceramic mineral, a cotton backing and cured resin. Ceramic mineral is created by heating alumina and other compounds, almost to the point of liquefaction. As the grain cools, it becomes extremely durable and tough. Ceramics cool cutting action reduces the risk for loading and part discoloration that may result from heat. These are some of the reasons its a good match for heat sensitive metals like stainless steel and high nickel alloys. Given the strength and durability of the mineral, this abrasive is a good match for blending, deburring and polishing. It will stand up to the heavy pressure that often results from applications like edge breaking and flash removal. Additionally, our cartridge roll comes in a variety of sizes and grades, so you can find the one thats best suited to your project needs. The multi-layer, multi-wear design of standard Abrasives ceramic cartridge roll prolongs abrasive service life and helps it withstand wear and tear. As the top abrasive layer wears down over time, underlying layers are exposed. The even breakdown reveals fresh mineral, so you get a consistent cut, part after part. Seemingly small, these cartridge rolls conquer big challenges when space is tight.
- OSHA 29 CFR 1910.1200
- Manufacturer Name:Â 3MAbrasive Material:Â Ceramic AluminaCountry of Origin:Â USGrade:Â FineGrit:Â 120Manufacturer Name:Â 3MMaximum Roll Diameter:Â 1/4 inOverall Length:Â 1-1/2 inPilot Hole Diameter:Â 0.12 inType:Â Straight
- Versatile range of minerals and grades are designed to meet specific project needs
- Arbor hole accommodates mandrel tool attachment, so abrasive may be used with various tools
- Multi-layer, multi-wear design enhances abrasive longevity and helps produce a consistent cut
- Ideal for blending, deburring and polishing on ferrous and non-ferrous metals
- Straight cylindrical shape enables operators to finish hard-to-reach areas
- The unique design of our standard Abrasives ceramic cartridge roll makes it a good match for cutting in, over and around irregular surfaces and contours. Its cylindrical shape enables the abrasive to tackle hard to reach areas or spaces that, otherwise, might be difficult to access. Multi-layer design exposes fresh abrasive throughout the life of the roll. The multi-layered standard Abrasives ceramic cartridge roll is cylindrical in shape, which helps it roll centrifugally over irregular edges and contours. We engineer the product by rolling abrasive material into a tight cylinder resembling a small, circular barrel. This shape helps the abrasive work within nooks and crannies of the part. Cartridge rolls have an arbor hole to accommodate a mandrel tool attachment (sold separately), which attaches to a rotary tool such as a die grinder or drill. Mandrels come in different sizes to fit a variety of cartridge rolls. Together, the mandrel and roll enable the user to grind or finish hard to reach areas of a workpiece such as angles and curves. A mandrel links the cartridge to the power tool. Abrasive material on standard Abrasives ceramic cartridge roll is comprised of ceramic mineral, a cotton backing and cured resin. Ceramic mineral is created by heating alumina and other compounds, almost to the point of liquefaction. As the grain cools, it becomes extremely durable and tough. Ceramics cool cutting action reduces the risk for loading and part discoloration that may result from heat. These are some of the reasons its a good match for heat sensitive metals like stainless steel and high nickel alloys. Given the strength and durability of the mineral, this abrasive is a good match for blending, deburring and polishing. It will stand up to the heavy pressure that often results from applications like edge breaking and flash removal. Additionally, our cartridge roll comes in a variety of sizes and grades, so you can find the one thats best suited to your project needs. The multi-layer, multi-wear design of standard Abrasives ceramic cartridge roll prolongs abrasive service life and helps it withstand wear and tear. As the top abrasive layer wears down over time, underlying layers are exposed. The even breakdown reveals fresh mineral, so you get a consistent cut, part after part. Seemingly small, these cartridge rolls conquer big challenges when space is tight.
- OSHA 29 CFR 1910.1200
Pricing Notice
Due to evolving trade policies, product prices may be subject to change. For details, please refer to our Terms of Sale. We remain committed to offering competitive pricing and exceptional service.
Terms of SaleHave a Question About a Product?
Our team is here to answer all your questions and provide the detailed information and support you need to make product decisions.
Contact Us3MStandard Abrasives 7100102941 Straight Cartridge Roll, 1/4 in Dia x 1-1/2 in OAL, 0.12 in Dia Pilot Hole, 120 Grit, Ceramic Alumina Abrasive
Part #:111534331
MFG #:7100102941$0.99
 / RL