SGS 36456 Z-Carb-AP Z1PLC Center Cutting High Performance Long Reach Neck Single End Variable Rake End Mill, 3/8 in Dia Cutter, 0.02 in Corner Radius, 7/8 in Length of Cut, 4 Flutes, 3/8 in Dia Shank, 5 in OAL, TX Coated

Pricing Notice

Due to evolving trade policies, product prices may be subject to change. For details, please refer to our Terms of Sale. We remain committed to offering competitive pricing and exceptional service.

Terms of Sale

Have a Question About a Product?

Our team is here to answer all your questions and provide the detailed information and support you need to make product decisions.

Contact Us

KYOCERA SGS Precision tools, Inc.

SGS 36456 Z-Carb-AP Z1PLC Center Cutting High Performance Long Reach Neck Single End Variable Rake End Mill, 3/8 in Dia Cutter, 0.02 in Corner Radius, 7/8 in Length of Cut, 4 Flutes, 3/8 in Dia Shank, 5 in OAL, TX Coated

ManufacturerSGS

Part #069936456

MFG #36456

UPC #691781364568

SGS End Mill, Center Cutting High Performance Long Reach Neck Single End Variable Rake, Series: Z-Carb-AP Z1PLC, 3/8 in Diameter Cutter, 0.02 in Corner Radius, 5 in Overall Length, 7/8 in Length of Cut, 4 Flutes, Right Spiral Flute, 3/8 in Shank Diameter, Right Hand Cutting Direction, 35 to 38 deg Helix Angle, Straight Shank, 3-1/8 in Shank Length, Solid Carbide, TX Coated

$67.01

/ EA

QTY

Knowledgeable Product TeamBenefit from our experienced team, ready to assist you with expert product knowledge and ensure a seamless shopping experience.

Manufacturer Name: KYOCERA SGS Precision tools, Inc.

Corner Radius: 0.02 in

Country of Origin: US

Cutter Diameter: 3/8 in

Cutting Direction: Right Hand

Finish: TX Coated

Flute Type: Right Spiral

Helix Angle: 35 to 38 deg

Length of Cut: 7/8 in

Manufacturer Name: KYOCERA Precision Tools, KYOCERA SGS Precision Tools, KYOCERA SGS Precision tools, Inc.

Material: Solid Carbide

Number of Flutes: 4

Overall Length: 5 in

Series: Z-Carb-AP Z1PLC

Shank Diameter: 3/8 in

Shank Length: 3-1/8 in

Shank Type: Straight

Type: Center Cutting High Performance Long Reach Neck Single End Variable Rake

Variable rake geometry alters and controls the cutting dynamic taking chatter suppression to an unprecedented level
Unequal flute spacing helps to disrupt the rhythmic pattern created by the cutting edge helping to suppress damaging harmonics
Long reach design allows for deeper and faster cuts
Enhanced corner geometry with tight tolerance corner radii
Recommended for materials <= 45 HRc (<= 420 Bhn)

SGS End Mill, Center Cutting High Performance Long Reach Neck Single End Variable Rake, Series: Z-Carb-AP Z1PLC, 3/8 in Diameter Cutter, 0.02 in Corner Radius, 5 in Overall Length, 7/8 in Length of Cut, 4 Flutes, Right Spiral Flute, 3/8 in Shank Diameter, Right Hand Cutting Direction, 35 to 38 deg Helix Angle, Straight Shank, 3-1/8 in Shank Length, Solid Carbide, TX Coated

Manufacturer Name: KYOCERA SGS Precision tools, Inc.

Corner Radius: 0.02 in

Country of Origin: US

Cutter Diameter: 3/8 in

Cutting Direction: Right Hand

Finish: TX Coated

Flute Type: Right Spiral

Helix Angle: 35 to 38 deg

Length of Cut: 7/8 in

Manufacturer Name: KYOCERA Precision Tools, KYOCERA SGS Precision Tools, KYOCERA SGS Precision tools, Inc.

Material: Solid Carbide

Number of Flutes: 4

Overall Length: 5 in

Series: Z-Carb-AP Z1PLC

Shank Diameter: 3/8 in

Shank Length: 3-1/8 in

Shank Type: Straight

Type: Center Cutting High Performance Long Reach Neck Single End Variable Rake

Variable rake geometry alters and controls the cutting dynamic taking chatter suppression to an unprecedented level
Unequal flute spacing helps to disrupt the rhythmic pattern created by the cutting edge helping to suppress damaging harmonics
Long reach design allows for deeper and faster cuts
Enhanced corner geometry with tight tolerance corner radii
Recommended for materials <= 45 HRc (<= 420 Bhn)

SGS End Mill, Center Cutting High Performance Long Reach Neck Single End Variable Rake, Series: Z-Carb-AP Z1PLC, 3/8 in Diameter Cutter, 0.02 in Corner Radius, 5 in Overall Length, 7/8 in Length of Cut, 4 Flutes, Right Spiral Flute, 3/8 in Shank Diameter, Right Hand Cutting Direction, 35 to 38 deg Helix Angle, Straight Shank, 3-1/8 in Shank Length, Solid Carbide, TX Coated

Pricing Notice

Due to evolving trade policies, product prices may be subject to change. For details, please refer to our Terms of Sale. We remain committed to offering competitive pricing and exceptional service.

Terms of Sale

Have a Question About a Product?

Our team is here to answer all your questions and provide the detailed information and support you need to make product decisions.

Contact Us

KYOCERA SGS Precision tools, Inc.SGS 36456 Z-Carb-AP Z1PLC Center Cutting High Performance Long Reach Neck Single End Variable Rake End Mill, 3/8 in Dia Cutter, 0.02 in Corner Radius, 7/8 in Length of Cut, 4 Flutes, 3/8 in Dia Shank, 5 in OAL, TX Coated

Part #:069936456

MFG #:36456

$67.01

/ EA

QTY