SGS 32632 V-Carb 55CR Center Cutting High Performance Positive Rake Single End End Mill, 7/16 in Dia Cutter, 0.015 in Corner Radius, 1 in Length of Cut, 5 Flutes, 7/16 in Dia Shank, 2-3/4 in OAL, AlTiN Coated

Pricing Notice

Due to evolving trade policies, product prices may be subject to change. For details, please refer to our Terms of Sale. We remain committed to offering competitive pricing and exceptional service.

Terms of Sale

Have a Question About a Product?

Our team is here to answer all your questions and provide the detailed information and support you need to make product decisions.

KYOCERA SGS Precision tools, Inc.

SGS 32632 V-Carb 55CR Center Cutting High Performance Positive Rake Single End End Mill, 7/16 in Dia Cutter, 0.015 in Corner Radius, 1 in Length of Cut, 5 Flutes, 7/16 in Dia Shank, 2-3/4 in OAL, AlTiN Coated

ManufacturerSGS

Part #069932632

MFG #32632

UPC #691781326320

SGS End Mill, Center Cutting High Performance Positive Rake Single End, Series: V-Carb 55CR, 7/16 in Diameter Cutter, 0.015 in Corner Radius, 2-3/4 in Overall Length, 1 in Length of Cut, 5 Flutes, Right Spiral Flute, 7/16 in Shank Diameter, Right Hand Cutting Direction, 45 deg Helix Angle, Straight Shank, 1-3/4 in Shank Length, Solid Carbide, AlTiN Coated

$69.95

/ EA

QTY

Knowledgeable Product TeamBenefit from our experienced team, ready to assist you with expert product knowledge and ensure a seamless shopping experience.

Manufacturer Name: KYOCERA SGS Precision tools, Inc.

Corner Radius: 0.015 in

Country of Origin: US

Cutter Diameter: 7/16 in

Cutting Direction: Right Hand

Finish: AlTiN Coated

Flute Type: Right Spiral

Helix Angle: 45 deg

Length of Cut: 1 in

Manufacturer Name: KYOCERA Precision Tools, KYOCERA SGS Precision Tools, KYOCERA SGS Precision tools, Inc.

Material: Solid Carbide

Number of Flutes: 5

Overall Length: 2-3/4 in

Series: V-Carb 55CR

Shank Diameter: 7/16 in

Shank Length: 1-3/4 in

Shank Type: Straight

Type: Center Cutting High Performance Positive Rake Single End

Unequal indexing, high helix and an ideal rake and relief combination for unmatched finishing capability
The choice when peak finish quality is the requirement
Enhanced corner geometry with tight tolerance corner radii
Recommended for materials <= 45 HRc (<= 420 Bhn)

V-Carb end mills set the standard for peak finish quality. These 5-flute, unequal helix tools feature unequal indexing and an ideal rake and relief combination for unmatched finishing capability. Available with a full selection of corner radii and ball nose configurations, the V-Carb portfolio is well equipped to handle your complex finishing requirements.