Hannibal Carbide Tool | Hannibal 600130 600M Material Specific Jobber Length Drill Bit, 13 mm Drill - Metric, 0.5118 in Drill - Decimal Inch, 118 deg Point, Tool Steel

Hannibal 600130 600M Material Specific Jobber Length Drill Bit, 13 mm Drill - Metric, 0.5118 in Drill - Decimal Inch, 118 deg Point, Tool Steel

Pricing Notice

Due to evolving trade policies, product prices may be subject to change. For details, please refer to our Terms of Sale. We remain committed to offering competitive pricing and exceptional service.

Terms of Sale

Have a Question About a Product?

Our team is here to answer all your questions and provide the detailed information and support you need to make product decisions.

Hannibal Carbide Tool

Hannibal 600130 600M Material Specific Jobber Length Drill Bit, 13 mm Drill - Metric, 0.5118 in Drill - Decimal Inch, 118 deg Point, Tool Steel

ManufacturerHannibal

Part #170960013

MFG #600130

Hannibal Jobber Length Drill Bit, Material Specific, Series: 600M, Metric/Imperial, 13 mm Drill - Metric, 0.5118 in Drill - Decimal Inch, 152 mm Overall Length, 114 mm Cutting Depth, Spiral Flute, 114 mm Flute Length, Flat/Tanged Shank, 118 deg Point, Standard Point, Carbide Cutting Edge, No Through Coolant, Tool Steel, Applicable Materials: Cast Iron and Non-Ferrous Materials

$73.03

/ EA

QTY

Knowledgeable Product TeamBenefit from our experienced team, ready to assist you with expert product knowledge and ensure a seamless shopping experience.

Manufacturer Name: Hannibal Carbide Tool

Cutting Depth: 114 mm

Cutting Edge Material: Carbide

Drill Diameter Measurement System: Metric/Imperial

Drill Size - Decimal Inch: 0.5118 in

Drill Size - Metric: 13 mm

Flute Length: 114 mm

Flute Type: Spiral

Material: Tool Steel

Overall Length: 152 mm

Point Angle: 118 deg

Point Type: Standard

Series: 600M

Shank Type: Flat/Tanged

Through Coolant (Yes/No): No

Type: Material Specific

ASME/ANSI B94.11M|NAS 907|USCTI Standard

Drills are end cutting tools used to produce holes when rapid removal of material is desired
Twist drills are generally effective in holes up to 3 tool diameters deep, peck cycles should be used for deeper holes to achieve better chip evacuation
Carbide tip high temperature brazed to hardened tool steel body
Smooth flutes for effective chip flow
Precision ground to insure concentricity of tip and body
The most popular carbide tipped drill will perform satisfactorily under a variety of conditions