Dynabrade | Dynabrade 47212 Planetary Geared Die Grinder, 1/4 in Collet, 0.4 hp, 23 scfm Air Flow, 90 psi, 5000 rpm Speed

Dynabrade 47212 Planetary Geared Die Grinder, 1/4 in Collet, 0.4 hp, 23 scfm Air Flow, 90 psi, 5000 rpm Speed

Pricing Notice

Due to evolving trade policies, product prices may be subject to change. For details, please refer to our Terms of Sale. We remain committed to offering competitive pricing and exceptional service.

Terms of Sale

Have a Question About a Product?

Our team is here to answer all your questions and provide the detailed information and support you need to make product decisions.

Dynabrade

Dynabrade 47212 Planetary Geared Die Grinder, 1/4 in Collet, 0.4 hp, 23 scfm Air Flow, 90 psi, 5000 rpm Speed

ManufacturerDynabrade

Part #134047212

MFG #47212

UPC #0616026472129

Dynabrade Die Grinder, Planetary Geared, Tool/Kit: Bare Tool, 1/4 in Collet, 5000 rpm, 0.4 hp, 23 scfm, 90 psi Air, 1/4 in NPT Air Inlet, Rear Exhaust Location, Lever Throttle, 1/4 in Minimum Hose Size, Composite Housing, 7 deg Offset, 75 dBA, 9 in L x 5.6 in H

$850.55

/ EA

QTY

Knowledgeable Product TeamBenefit from our experienced team, ready to assist you with expert product knowledge and ensure a seamless shopping experience.

Manufacturer Name: Dynabrade

Air Flow Rate: 23 scfm

Air Inlet: 1/4 in NPT

Air Pressure: 90 psi

Collet Capacity: 1/4 in

Country of Origin: US

Dimensions: 9 in L x 5.6 in H

Exhaust Location: Rear

Handle Type: 7 deg Offset

Horsepower: 0.4 hp

Housing Material: Composite

Manufacturer Name: Dynabrade

Minimum Hose Size: 1/4 in

Sound Level: 75 dBA

Speed: 5000 rpm

Throttle Style: Lever

Tool/Kit: Bare Tool

Type: Planetary Geared

1/4 in and 6 mm Collet Inserts

Highest horsepower and torque levels of any similar competitive product
High torque planetary-geared air motor
Slow speeds allow additional use as buffer/polisher
Kevlar phenolic vanes for longer life
One-piece spindle keeps all rotating components on the same centerline for reduced run-out, which means lower vibration levels and increased gear life
Lightweight ergonomic design for greater comfort and control
Pinion piloted on rotor to reduce run-out and increase gear life
Needle bearing assures proper shaft alignment and increases gear life
Dual wick lubrication system saturated with gear oil for extended gear life over 700 hours
This helps administer the right amount and keep the gear oil on the metal gears

For attaching carbide burrs, rotary files, mounted points, wheels and discs

1/4 in and 6 mm Collet Inserts

Manufacturer Name: Dynabrade

Air Flow Rate: 23 scfm

Air Inlet: 1/4 in NPT

Air Pressure: 90 psi

Collet Capacity: 1/4 in

Country of Origin: US

Dimensions: 9 in L x 5.6 in H

Exhaust Location: Rear

Handle Type: 7 deg Offset

Horsepower: 0.4 hp

Housing Material: Composite

Manufacturer Name: Dynabrade

Minimum Hose Size: 1/4 in

Sound Level: 75 dBA

Speed: 5000 rpm

Throttle Style: Lever

Tool/Kit: Bare Tool

Type: Planetary Geared

1/4 in and 6 mm Collet Inserts

Highest horsepower and torque levels of any similar competitive product
High torque planetary-geared air motor
Slow speeds allow additional use as buffer/polisher
Kevlar phenolic vanes for longer life
One-piece spindle keeps all rotating components on the same centerline for reduced run-out, which means lower vibration levels and increased gear life
Lightweight ergonomic design for greater comfort and control
Pinion piloted on rotor to reduce run-out and increase gear life
Needle bearing assures proper shaft alignment and increases gear life
Dual wick lubrication system saturated with gear oil for extended gear life over 700 hours
This helps administer the right amount and keep the gear oil on the metal gears

For attaching carbide burrs, rotary files, mounted points, wheels and discs

1/4 in and 6 mm Collet Inserts

Pricing Notice

Due to evolving trade policies, product prices may be subject to change. For details, please refer to our Terms of Sale. We remain committed to offering competitive pricing and exceptional service.

Terms of Sale

Have a Question About a Product?

Our team is here to answer all your questions and provide the detailed information and support you need to make product decisions.

DynabradeDynabrade 47212 Planetary Geared Die Grinder, 1/4 in Collet, 0.4 hp, 23 scfm Air Flow, 90 psi, 5000 rpm Speed

Part #:134047212

MFG #:47212

$850.55

/ EA

QTY