Name: Drill America D/AMMCO18.00 Heavy Duty Reduced Shank Drill, 18 mm Drill - Metric, 0.7087 in Drill - Decimal Inch, 1/2 in Shank, Cobalt
Brand: Drill America
SKU: DRILL_AMERICA_Q2_2019_12319
Availability: OutOfStock

Drill America

Drill America D/AMMCO18.00 Heavy Duty Reduced Shank Drill, 18 mm Drill - Metric, 0.7087 in Drill - Decimal Inch, 1/2 in Shank, Cobalt

Pricing Notice

Due to evolving trade policies, product prices may be subject to change. For details, please refer to our Terms of Sale. We remain committed to offering competitive pricing and exceptional service.

Terms of Sale

Have a Question About a Product?

Our team is here to answer all your questions and provide the detailed information and support you need to make product decisions.

Contact Us

Drill America

Drill America D/AMMCO18.00 Heavy Duty Reduced Shank Drill, 18 mm Drill - Metric, 0.7087 in Drill - Decimal Inch, 1/2 in Shank, Cobalt

ManufacturerDrill America

Part #178300018

MFG #D/AMMCO18.00

UPC #887861000130

Drill America Reduced Shank Drill, Heavy Duty, Series: D/AMMCO, 18 mm Drill Size - Metric, 0.7087 in Drill Size - Decimal Inch, 209 mm Overall Length, 144 mm Cutting Depth, 2 Flutes, 144 mm Flute Length, 1/2 in Shank, Round/Reduced Shank, 135 deg Point, Split Point, Right Hand Cutting, Cobalt Cutting Edge, Cobalt, Gold, Applicable Materials: Stainless Steel, Inconel and Titanium

$ / EA

QTY

Knowledgeable Product TeamBenefit from our experienced team, ready to assist you with expert product knowledge and ensure a seamless shopping experience.

Manufacturer Name: Drill America

Country of Origin: CN, US

Cutting Depth: 144 mm

Cutting Direction: Right Hand

Cutting Edge Material: Cobalt

Drill Size - Decimal Inch: 0.7087 in

Drill Size - Metric: 18 mm

Finish: Gold

Flute Length: 144 mm

Manufacturer Name: Drill America

Material: Cobalt

Number of Flutes: 2

Overall Length: 209 mm

Point Angle: 135 deg

Point Type: Split

Series: D/AMMCO

Shank Size: 1/2 in

Shank Type: Reduced/Round

Type: Heavy Duty

NAS 907|PROP65: This product contains Cobalt and/or Nickel and/or Lead a chemical known to the state of California to cause cancer, or birth defects or other reproductive harm. For more information: www.P65Warnings.ca.gov

Cobalt drill bits are effective in drilling tough, high tensile strength materials
Display high red hardness, permitting speeds up to 30 Percent greater than with conventional M2 high speed steel
135 deg split point tip for fast penetration and accurate drilling
Round shank for use in a wide range of tool holding systems
Common Flute Length and Overall Length for minimal adjustment during tool changes

Cobalt drill bits are are effective in drilling tough, high tensile strength materials such as cast iron, inconel, stainless steel and titanium. They display high red hardness, permitting speeds up to 30% greater than with conventional M2 high speed steel. They have a 135° split point tip for fast penetration and accurate drilling. Compared to a conventional 118 degree tip, these drills wont go "walking" on you. Reduced Shank Drills expand the size range capacity of a portable drill chuck.

Catalog

Specification Sheet

Video Link

Manufacturer Name: Drill America

Country of Origin: CN, US

Cutting Depth: 144 mm

Cutting Direction: Right Hand

Cutting Edge Material: Cobalt

Drill Size - Decimal Inch: 0.7087 in

Drill Size - Metric: 18 mm

Finish: Gold

Flute Length: 144 mm

Manufacturer Name: Drill America

Material: Cobalt

Number of Flutes: 2

Overall Length: 209 mm

Point Angle: 135 deg

Point Type: Split

Series: D/AMMCO

Shank Size: 1/2 in

Shank Type: Reduced/Round

Type: Heavy Duty

NAS 907|PROP65: This product contains Cobalt and/or Nickel and/or Lead a chemical known to the state of California to cause cancer, or birth defects or other reproductive harm. For more information: www.P65Warnings.ca.gov

Cobalt drill bits are effective in drilling tough, high tensile strength materials
Display high red hardness, permitting speeds up to 30 Percent greater than with conventional M2 high speed steel
135 deg split point tip for fast penetration and accurate drilling
Round shank for use in a wide range of tool holding systems
Common Flute Length and Overall Length for minimal adjustment during tool changes

Cobalt drill bits are are effective in drilling tough, high tensile strength materials such as cast iron, inconel, stainless steel and titanium. They display high red hardness, permitting speeds up to 30% greater than with conventional M2 high speed steel. They have a 135° split point tip for fast penetration and accurate drilling. Compared to a conventional 118 degree tip, these drills wont go "walking" on you. Reduced Shank Drills expand the size range capacity of a portable drill chuck.

Catalog

Specification Sheet

Video Link

Pricing Notice

Due to evolving trade policies, product prices may be subject to change. For details, please refer to our Terms of Sale. We remain committed to offering competitive pricing and exceptional service.

Terms of Sale

Have a Question About a Product?

Our team is here to answer all your questions and provide the detailed information and support you need to make product decisions.

Contact Us

Drill AmericaDrill America D/AMMCO18.00 Heavy Duty Reduced Shank Drill, 18 mm Drill - Metric, 0.7087 in Drill - Decimal Inch, 1/2 in Shank, Cobalt

Part #:178300018

MFG #:D/AMMCO18.00

$ / EA

QTY