Drill America | Drill America D/AMMCO16.00 Heavy Duty Reduced Shank Drill, 16 mm Drill - Metric, 0.6299 in Drill - Decimal Inch, 1/2 in Shank, Cobalt

Drill America D/AMMCO16.00 Heavy Duty Reduced Shank Drill, 16 mm Drill - Metric, 0.6299 in Drill - Decimal Inch, 1/2 in Shank, Cobalt

Pricing Notice

Due to evolving trade policies, product prices may be subject to change. For details, please refer to our Terms of Sale. We remain committed to offering competitive pricing and exceptional service.

Terms of Sale

Have a Question About a Product?

Our team is here to answer all your questions and provide the detailed information and support you need to make product decisions.

Contact Us

Drill America

Drill America D/AMMCO16.00 Heavy Duty Reduced Shank Drill, 16 mm Drill - Metric, 0.6299 in Drill - Decimal Inch, 1/2 in Shank, Cobalt

ManufacturerDrill America

Part #178300016

MFG #D/AMMCO16.00

UPC #887861000000

Drill America Reduced Shank Drill, Heavy Duty, Series: D/AMMCO, 16 mm Drill Size - Metric, 0.6299 in Drill Size - Decimal Inch, 178 mm Overall Length, 120 mm Cutting Depth, 2 Flutes, 120 mm Flute Length, 1/2 in Shank, Reduced/Round Shank, 135 deg Point, Split Point, Right Hand Cutting, Cobalt Cutting Edge, Cobalt, Gold, Applicable Materials: Stainless Steel, Inconel and Titanium

$40.75

/ EA

QTY

Knowledgeable Product TeamBenefit from our experienced team, ready to assist you with expert product knowledge and ensure a seamless shopping experience.

Manufacturer Name: Drill America

Country of Origin: CN, US

Cutting Depth: 120 mm

Cutting Direction: Right Hand

Cutting Edge Material: Cobalt

Drill Size - Decimal Inch: 0.6299 in

Drill Size - Metric: 16 mm

Finish: Gold

Flute Length: 120 mm

Manufacturer Name: Drill America

Material: Cobalt

Number of Flutes: 2

Overall Length: 178 mm

Point Angle: 135 deg

Point Type: Split

Series: D/AMMCO

Shank Size: 1/2 in

Shank Type: Reduced/Round

Type: Heavy Duty

These drill bits display high red hardness, permitting speeds up to 30% greater than with conventional M2 HSS and are especially effective in drilling tough, high tensile strength materials like stainless steel, inconel and titanium
The 135 deg split point is self-centering and reduces thrust

NAS 907|PROP65: This product contains Cobalt and/or Nickel and/or Lead a chemical known to the state of California to cause cancer, or birth defects or other reproductive harm. For more information: www.P65Warnings.ca.gov

Cobalt drill bits are are effective in drilling tough, high tensile strength materials such as cast iron, inconel, stainless steel and titanium. They display high red hardness, permitting speeds up to 30% greater than with conventional M2 high speed steel. They have a 135° split point tip for fast penetration and accurate drilling. Compared to a conventional 118 degree tip, these drills wont go "walking" on you. Reduced Shank Drills expand the size range capacity of a portable drill chuck.

Specification Sheet

Video Link

Manufacturer Name: Drill America

Country of Origin: CN, US

Cutting Depth: 120 mm

Cutting Direction: Right Hand

Cutting Edge Material: Cobalt

Drill Size - Decimal Inch: 0.6299 in

Drill Size - Metric: 16 mm

Finish: Gold

Flute Length: 120 mm

Manufacturer Name: Drill America

Material: Cobalt

Number of Flutes: 2

Overall Length: 178 mm

Point Angle: 135 deg

Point Type: Split

Series: D/AMMCO

Shank Size: 1/2 in

Shank Type: Reduced/Round

Type: Heavy Duty

These drill bits display high red hardness, permitting speeds up to 30% greater than with conventional M2 HSS and are especially effective in drilling tough, high tensile strength materials like stainless steel, inconel and titanium
The 135 deg split point is self-centering and reduces thrust

NAS 907|PROP65: This product contains Cobalt and/or Nickel and/or Lead a chemical known to the state of California to cause cancer, or birth defects or other reproductive harm. For more information: www.P65Warnings.ca.gov

Cobalt drill bits are are effective in drilling tough, high tensile strength materials such as cast iron, inconel, stainless steel and titanium. They display high red hardness, permitting speeds up to 30% greater than with conventional M2 high speed steel. They have a 135° split point tip for fast penetration and accurate drilling. Compared to a conventional 118 degree tip, these drills wont go "walking" on you. Reduced Shank Drills expand the size range capacity of a portable drill chuck.

Specification Sheet

Video Link

Pricing Notice

Due to evolving trade policies, product prices may be subject to change. For details, please refer to our Terms of Sale. We remain committed to offering competitive pricing and exceptional service.

Terms of Sale

Have a Question About a Product?

Our team is here to answer all your questions and provide the detailed information and support you need to make product decisions.

Contact Us

Drill AmericaDrill America D/AMMCO16.00 Heavy Duty Reduced Shank Drill, 16 mm Drill - Metric, 0.6299 in Drill - Decimal Inch, 1/2 in Shank, Cobalt

Part #:178300016

MFG #:D/AMMCO16.00

$40.75

/ EA

QTY