{0} items in cart
loading content
Scotch-Weld 7010367433 Anaerobic Fast Setting Gasket Maker Adhesive, 10.58 oz Container Cartridge Container
Pricing Notice
Due to evolving trade policies, product prices may be subject to change. For details, please refer to our Terms of Sale. We remain committed to offering competitive pricing and exceptional service.
Terms of SaleHave a Question About a Product?
Our team is here to answer all your questions and provide the detailed information and support you need to make product decisions.
Contact UsScotch-Weld 7010367433 Anaerobic Fast Setting Gasket Maker Adhesive, 10.58 oz Container Cartridge Container
ManufacturerScotch-Weld
Part #801162660
MFG #7010367433
UPC #048011626604
Scotch-Weld, 7010367433, Gasket Maker Adhesive, Anaerobic Fast Setting, Cartridge Container, 10.58 oz Container, Modified Urethane Acrylate Chemical, 4 to 24 hr Setting, 24 hr Curing, Red, -65 to 300 deg F, 1.08 Specific Gravity, <5 g/L VOC, Adheres to: Anodized Aluminum, Brass, Bronze, Commercial Aluminum, Copper, Cadmium, Chemical Black Oxide and Galvanized Steel
$Â /Â EA
Knowledgeable Product TeamBenefit from our experienced team, ready to assist you with expert product knowledge and ensure a seamless shopping experience.
- Manufacturer Name:Â 3MAdheres to:Â Anodized Aluminum, Brass, Bronze, Commercial Aluminum, Copper, Cadmium, Chemical Black Oxide and Galvanized SteelChemical Type:Â Modified Urethane AcrylateColor:Â RedContainer Size:Â 10.58 ozContainer Type:Â CartridgeCountry of Origin:Â GBCuring Time:Â 24 hrManufacturer Name:Â 3MSetting Time:Â 4 to 24 hrSpecific Gravity:Â 1.08Temperature Rating:Â -65 to 300 deg FType:Â Anaerobic Fast SettingVOC Content:Â <5 g/L
- Eliminates the need for pre-cut gaskets, reducing weight, inventory and cost
- Cure at room temperature and seal rigid assemblies of any shape or size
- Does not shrink, crack, sag or run
- Tough, flexible form in place gasket maker ideal for sealing fitting joints and flanges such as gearbox and engine casings, fuel and water pumps, auto thermostats, pipe flanges and other mated surfaces
- Prevent corrosion
- Shock and vibration resistance
- Seal against fluid leakage modified
- Withstands temperatures up to 300 deg F (148 deg C)
- OSHA 29 CFR 1910.1200|Mil-C-4003
- 3M Scotch-Weld high temperature gasket maker GM18 is a red, flexible, 1-component anaerobic sealant formulated to replace pre-cut gaskets, O-rings or used as form-in-place gaskets. They cure at room temperature and seal rigid assemblies of any shape or size. They can be used to fill pits, scratches and gouges in the flange surface without having to grind or skim the mating surfaces. Our 3M Scotch-Weld high temperature gasket maker GM18 can be applied straight from the tube or by tracing, roll coating or screen printing to provide an instant low pressure seal, eliminating the need for pre-cut gaskets, reducing weight, inventory and costs. In the absence of oxygen and in the presence of metal, this modified urethane acrylate (in paste form) cures quickly to a polymer that seals, secures and retains. 3M Scotch-Weld high temperature gasket maker GM18 withstands temperatures as high as 300 deg F (148 deg C) and does not shrink, crack, sag or run for use on rigid flanges and to seal metal assemblies. Anaerobic adhesives are uniquely formulated to cure in the absence of oxygen. The term "anaerobic" means "living without air" and when the oxygen is excluded, a chemical chain reaction begins that causes the adhesive to polymerize. Contact with metal speeds the polymerization process and rapidly accelerates the curing process, forming tough cross linked plastic that provides aggressive adhesion with effective shear strength. More commonly referred to as thread lockers, pipe sealants, retaining compounds and gasket makers, these adhesives are often used to enhance the seal or holding force, in the threads of joined fastener systems such as nut-and-bolt assemblies. A nut-and-bolt assembly may have as little as 15% metal-to-metal contact and even a small amount of anaerobic adhesive readily fills any air voids between the threads and then hardens to a thermoset plastic. These unique adhesives are easy-to-dispense, cure rapidly and provide effective torque strength while resisting temperature and vibration and sealing out moisture and gasses to protect against corrosion. Anaerobic adhesives can decrease manufacturing costs, enhance equipment reliability, minimize aftermarket breakdown and reduce warranty claims.
- Manufacturer Name:Â 3MAdheres to:Â Anodized Aluminum, Brass, Bronze, Commercial Aluminum, Copper, Cadmium, Chemical Black Oxide and Galvanized SteelChemical Type:Â Modified Urethane AcrylateColor:Â RedContainer Size:Â 10.58 ozContainer Type:Â CartridgeCountry of Origin:Â GBCuring Time:Â 24 hrManufacturer Name:Â 3MSetting Time:Â 4 to 24 hrSpecific Gravity:Â 1.08Temperature Rating:Â -65 to 300 deg FType:Â Anaerobic Fast SettingVOC Content:Â <5 g/L
- Eliminates the need for pre-cut gaskets, reducing weight, inventory and cost
- Cure at room temperature and seal rigid assemblies of any shape or size
- Does not shrink, crack, sag or run
- Tough, flexible form in place gasket maker ideal for sealing fitting joints and flanges such as gearbox and engine casings, fuel and water pumps, auto thermostats, pipe flanges and other mated surfaces
- Prevent corrosion
- Shock and vibration resistance
- Seal against fluid leakage modified
- Withstands temperatures up to 300 deg F (148 deg C)
- OSHA 29 CFR 1910.1200|Mil-C-4003
- 3M Scotch-Weld high temperature gasket maker GM18 is a red, flexible, 1-component anaerobic sealant formulated to replace pre-cut gaskets, O-rings or used as form-in-place gaskets. They cure at room temperature and seal rigid assemblies of any shape or size. They can be used to fill pits, scratches and gouges in the flange surface without having to grind or skim the mating surfaces. Our 3M Scotch-Weld high temperature gasket maker GM18 can be applied straight from the tube or by tracing, roll coating or screen printing to provide an instant low pressure seal, eliminating the need for pre-cut gaskets, reducing weight, inventory and costs. In the absence of oxygen and in the presence of metal, this modified urethane acrylate (in paste form) cures quickly to a polymer that seals, secures and retains. 3M Scotch-Weld high temperature gasket maker GM18 withstands temperatures as high as 300 deg F (148 deg C) and does not shrink, crack, sag or run for use on rigid flanges and to seal metal assemblies. Anaerobic adhesives are uniquely formulated to cure in the absence of oxygen. The term "anaerobic" means "living without air" and when the oxygen is excluded, a chemical chain reaction begins that causes the adhesive to polymerize. Contact with metal speeds the polymerization process and rapidly accelerates the curing process, forming tough cross linked plastic that provides aggressive adhesion with effective shear strength. More commonly referred to as thread lockers, pipe sealants, retaining compounds and gasket makers, these adhesives are often used to enhance the seal or holding force, in the threads of joined fastener systems such as nut-and-bolt assemblies. A nut-and-bolt assembly may have as little as 15% metal-to-metal contact and even a small amount of anaerobic adhesive readily fills any air voids between the threads and then hardens to a thermoset plastic. These unique adhesives are easy-to-dispense, cure rapidly and provide effective torque strength while resisting temperature and vibration and sealing out moisture and gasses to protect against corrosion. Anaerobic adhesives can decrease manufacturing costs, enhance equipment reliability, minimize aftermarket breakdown and reduce warranty claims.
Pricing Notice
Due to evolving trade policies, product prices may be subject to change. For details, please refer to our Terms of Sale. We remain committed to offering competitive pricing and exceptional service.
Terms of SaleHave a Question About a Product?
Our team is here to answer all your questions and provide the detailed information and support you need to make product decisions.
Contact Us3MScotch-Weld 7010367433 Anaerobic Fast Setting Gasket Maker Adhesive, 10.58 oz Container Cartridge Container
Part #:801162660
MFG #:7010367433$Â /Â EA