Fluke FLUKE-789 Process Meter, 0 to 1000 VAC/VDC, 0 to 1 A, Multi-Line LCD Display, Plastic

• 24 V loop power supply
• Very large dual display
• Enhanced backlight with 2 brightness settings
• 1200 ohm drive capability on mA source
• HART mode setting with loop power and a built-in 250 ohm resistor
• 0% and 100 % buttons to toggle between 4 and 20 mA sourcing for a quick span check
• Externally accessible fuses for easy replacement
• Infrared-port to process data in FlukeView Forms (V2.1) software
• Precision 1000 V, 440 mA true RMS digital Multimeter
• 0.1% dc voltage accuracy, 0.05% dc current accuracy
• Frequency measurement to 20 kHz
• Min/max/average/hold/relative modes
• Diode test and continuity beeper
• Simultaneous mA and % of scale readout
• 20 mA dc current source/loop calibrator/simulator
• Manual step (100%, 25%, coarse, fine) plus auto step and auto ramp
• Externally accessible battery for easy battery changes
• Display current and % of span, auto step, auto ramp
• -20 to 55 deg C operating, -40 to 60 deg C storage temperature, 95% upto 30 deg C, 75% upto 40 deg C, 45% upto 50 deg C, 35% upto 55 deg C humidity

(4) AA Batteries, Test Leads, Alligator Clips and Instructions