Fluke VCHEK FLUKE-113 Utility Digital Multimeter, 600 V AC/DC, 60 kOhm Measuring, 6/60/600 V AC/DC, 600 Ohm/6/60 kOhm, Backlight/Digital Display
Pricing Notice
Due to evolving trade policies, product prices may be subject to change. For details, please refer to our Terms of Sale. We remain committed to offering competitive pricing and exceptional service.
Terms of SaleHave a Question About a Product?
Our team is here to answer all your questions and provide the detailed information and support you need to make product decisions.
Contact UsFluke VCHEK FLUKE-113 Utility Digital Multimeter, 600 V AC/DC, 60 kOhm Measuring, 6/60/600 V AC/DC, 600 Ohm/6/60 kOhm, Backlight/Digital Display
ManufacturerFluke
Part #596943452
MFG #3078875
UPC #095969434522
Fluke VCHEK Digital Multimeter, Utility, 600 V AC/DC, 60 kOhm Measuring, 6/60/600 V AC/DC, 600 Ohm/6/60 kOhm Resistance, Safety Rating: CAT III 600 V AC/DC, CAT IV 300 V AC/DC Pollution deg 2, 1000 nF, 10/100/9999 uF Capacitance, 2% + 3 (45 to 500 Hz), 4% +3 (500 Hz to 1 kHz) VAC Accuracy, Backlight/Digital Display, 9 VDC Alkaline/ANSI 1604A/IEC 6F22 Battery, No Peak Hold, Yes Diode Test, 1.81 in L x 3.35 in W x 6.58 in H Dimensions, 14 to 122 deg F, Hard Plastic
$220.54
 / EAKnowledgeable Product TeamBenefit from our experienced team, ready to assist you with expert product knowledge and ensure a seamless shopping experience.
- Manufacturer Name:Â FlukeAccuracy:Â 2% + 3 (45 to 500 Hz), 4% +3 (500 Hz to 1 kHz) V AC, 2% + 3 (45 to 500 Hz), 4% +3 (500 Hz to 1 kHz) VACBattery Type:Â 9 VDC Alkaline/ANSI 1604A/IEC 6F22Capacitance:Â 1000 nF, 10/100/9999 uFDimensions:Â 1.81 in L x 3.35 in W x 6.58 in HDiode Test:Â YesDisplay Type:Â Backlight/DigitalManufacturer Name:Â FlukeMaterial:Â Hard PlasticMeasuring Range:Â 600 V AC/DC, 60 kOhm, 600 VDC/VAC, 60 kOhmPeak Hold:Â NoResistance:Â 600 Ohm/6/60 kOhmSafety Rating:Â CAT III 600 V AC/DC, CAT IV 300 V AC/DC Pollution deg 2, CAT III 600 VAC/VDC, CAT IV 300 VAC/VDC Pollution deg 2Temperature Rating:Â 14 to 122 deg FType:Â UtilityVoltage Rating:Â 6/60/600 V AC/DC, 6/60/600 VAC/VDC
Fluke 113 Utility Multi-meter TL75 Test Leads, (1) 9 VDC Battery and Printed Users Manual
- VCHEK LoZ low impedance measurement function to simultaneously test for voltage or continuity
- True-RMS for accurate AC measurements on non-linear loads
- Large backlit display allows for easy visibility in low lit areas
- Record signal fluctuations using the minimum maximum function
- Diode test for testing general purpose germanium, silicon and power diodes
- Integral holster with probe holders for easy storage
- Auto and manual ranging for added user functionality
- Meets measurement category CAT III 600 VAC and category IV 300 VAC standards for a higher level of safety
- 2% 3 (45 to 500 Hz), 4% 3 (500 Hz to 1 kHz) accuracy
- Resistance range - 600 Ohm with accuracy of +/-(0.9% 2), 6 kOhm, 60 kOhm with accuracy of +/-(0.9% 1)
- Capacitance range 1000 nF, 10 uF, 100 uF, 100 uF to 1000 uF with accuracy of +/-(1.9% 2), greater than 1000 uF with accuracy of +/-(5% 20)
- 300 hr typical alkaline, without backlight
- 3-3/4 digits 6000 count display
- Fluke 113 digital multi-meter gives users the means to quickly and easily do basic meter set and reconnect testing. This meter is simple to use and has the features needed to repair most electrical problems. The Fluke 113 has significant improvements over other digital multimeters available on the market, including Fluke model 7-600. Using the Fluke VCHEK LoZ low impedance measurement function, users can simultaneously test for voltage or continuity. The min max function lets you record signal fluctuations. The Fluke 113 can perform diode tests and also provides both auto and manual ranging capabilities. With features such as conformance to the latest safety standards, backlight and a much larger display thats easier to view, this meter is a must have for every toolbox.
- CE Marked|cCSAus Certified|UL Listed|ANSI/ISA 82.02.01 (61010-1) 2004|CAN/CSA C22.2 File No. 61010-1-04|UL File No. 61010-1 (2004)|IEC/EN 61010-1 2nd Edition|EMC EN 61326-1|ECCN: EAR99|PROP65: This product is in compliance with Prop65, it is not known to contain any chemicals associated with this regulation
- Fluke 113 Utility Multi-meter TL75 Test Leads, (1) 9 VDC Battery and Printed Users Manual
- Manufacturer Name:Â FlukeAccuracy:Â 2% + 3 (45 to 500 Hz), 4% +3 (500 Hz to 1 kHz) V AC, 2% + 3 (45 to 500 Hz), 4% +3 (500 Hz to 1 kHz) VACBattery Type:Â 9 VDC Alkaline/ANSI 1604A/IEC 6F22Capacitance:Â 1000 nF, 10/100/9999 uFDimensions:Â 1.81 in L x 3.35 in W x 6.58 in HDiode Test:Â YesDisplay Type:Â Backlight/DigitalManufacturer Name:Â FlukeMaterial:Â Hard PlasticMeasuring Range:Â 600 V AC/DC, 60 kOhm, 600 VDC/VAC, 60 kOhmPeak Hold:Â NoResistance:Â 600 Ohm/6/60 kOhmSafety Rating:Â CAT III 600 V AC/DC, CAT IV 300 V AC/DC Pollution deg 2, CAT III 600 VAC/VDC, CAT IV 300 VAC/VDC Pollution deg 2Temperature Rating:Â 14 to 122 deg FType:Â UtilityVoltage Rating:Â 6/60/600 V AC/DC, 6/60/600 VAC/VDC
Fluke 113 Utility Multi-meter TL75 Test Leads, (1) 9 VDC Battery and Printed Users Manual
- VCHEK LoZ low impedance measurement function to simultaneously test for voltage or continuity
- True-RMS for accurate AC measurements on non-linear loads
- Large backlit display allows for easy visibility in low lit areas
- Record signal fluctuations using the minimum maximum function
- Diode test for testing general purpose germanium, silicon and power diodes
- Integral holster with probe holders for easy storage
- Auto and manual ranging for added user functionality
- Meets measurement category CAT III 600 VAC and category IV 300 VAC standards for a higher level of safety
- 2% 3 (45 to 500 Hz), 4% 3 (500 Hz to 1 kHz) accuracy
- Resistance range - 600 Ohm with accuracy of +/-(0.9% 2), 6 kOhm, 60 kOhm with accuracy of +/-(0.9% 1)
- Capacitance range 1000 nF, 10 uF, 100 uF, 100 uF to 1000 uF with accuracy of +/-(1.9% 2), greater than 1000 uF with accuracy of +/-(5% 20)
- 300 hr typical alkaline, without backlight
- 3-3/4 digits 6000 count display
- Fluke 113 digital multi-meter gives users the means to quickly and easily do basic meter set and reconnect testing. This meter is simple to use and has the features needed to repair most electrical problems. The Fluke 113 has significant improvements over other digital multimeters available on the market, including Fluke model 7-600. Using the Fluke VCHEK LoZ low impedance measurement function, users can simultaneously test for voltage or continuity. The min max function lets you record signal fluctuations. The Fluke 113 can perform diode tests and also provides both auto and manual ranging capabilities. With features such as conformance to the latest safety standards, backlight and a much larger display thats easier to view, this meter is a must have for every toolbox.
- CE Marked|cCSAus Certified|UL Listed|ANSI/ISA 82.02.01 (61010-1) 2004|CAN/CSA C22.2 File No. 61010-1-04|UL File No. 61010-1 (2004)|IEC/EN 61010-1 2nd Edition|EMC EN 61326-1|ECCN: EAR99|PROP65: This product is in compliance with Prop65, it is not known to contain any chemicals associated with this regulation
- Fluke 113 Utility Multi-meter TL75 Test Leads, (1) 9 VDC Battery and Printed Users Manual
Pricing Notice
Due to evolving trade policies, product prices may be subject to change. For details, please refer to our Terms of Sale. We remain committed to offering competitive pricing and exceptional service.
Terms of SaleHave a Question About a Product?
Our team is here to answer all your questions and provide the detailed information and support you need to make product decisions.
Contact UsFlukeFluke VCHEK FLUKE-113 Utility Digital Multimeter, 600 V AC/DC, 60 kOhm Measuring, 6/60/600 V AC/DC, 600 Ohm/6/60 kOhm, Backlight/Digital Display
Part #:596943452
MFG #:3078875$220.54
 / EA