Starrett 220XFL-1 Multi-Anvil Micrometer, 0 to 1 in Measuring, Graduations 0.001 in, Forged Steel, Satin Chrome
Pricing Notice
Due to evolving trade policies, product prices may be subject to change. For details, please refer to our Terms of Sale. We remain committed to offering competitive pricing and exceptional service.
Terms of SaleHave a Question About a Product?
Our team is here to answer all your questions and provide the detailed information and support you need to make product decisions.
Contact UsStarrett 220XFL-1 Multi-Anvil Micrometer, 0 to 1 in Measuring, Graduations 0.001 in, Forged Steel, Satin Chrome
ManufacturerStarrett
Part #530450746
MFG #50746
UPC #049659507461
Starrett Multi-Anvil Micrometer, Series: 220, 0 to 1 in Measuring, +/-0.0002 in Accuracy, Graduations: 0.001 in, 0.001 in Resolution, Round and Flat Anvil, Flat Spindle, 0.235 in Spindle Diameter, Friction Thimble, Forged Steel, Satin Chrome, 4-23/64 in L x 39/64 in W x 1-25/32 in H Dimensions
$520.15
/ EAKnowledgeable Product TeamBenefit from our experienced team, ready to assist you with expert product knowledge and ensure a seamless shopping experience.
- Manufacturer Name: L.S. StarrettAccuracy: +/-0.0002 inAnvil Type: Round and FlatCountry of Origin: USDimensions: 4-23/64 in L x 39/64 in W x 1-25/32 in HFinish: Satin ChromeGraduations: 0.001 inManufacturer Name: L.S. StarrettMaterial: Forged SteelMeasuring Range: 0 to 1 inResolution: 0.001 inSeries: 220Spindle Diameter: 0.235 inSpindle Type: FlatThimble Type: Friction
- Rigid one-piece frame of drop forged steel, ribbed for strength and stability
- Extremely hard and stable one-piece spindle
- Micro-lapped measuring faces
- Will handle a wide variety of measurements impossible to obtain with regular micrometers
- Starrett satin chrome finish, no-glare and resists rust
- Advanced sleeve design with staggered lines and distinct figures for precise and easy readability
- Ring-type knurled lock nut for quick and sure locking
- Interchangeable anvils are rigidly held in the vise type frame and quickly interchanged by a single lock screw adjustment
- Two hardened anvils furnished - round anvil approximately 0.120 in diameter and flat anvil approximately 1/8 in and 0.060 in thick
- PROP65: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm
- The Starrett 220M Mul-T-Anvil Micrometer with Round and Flat Anvils, Carbide Faced Spindle was a new development in micrometer design and patent is held by Starrett. This micrometer will handle a wide variety of measurements impossible to obtain with regular micrometers, such as measuring the wall thickness of tubing, cylindrical walls from a hole or slot to an edge, many hard-to-reach locations, and the thickness of screw heads, shoulder lengths, etc. A most interesting feature of this tool is that additional anvils of various shapes can be made up, and many of these anvils do not have to be hardened for that special job. This micrometer can be furnished with .0001" graduations, but we recommend .001" or 0.01mm for easier and more accurate readings. The Starrett Company, with our years of experience, recommends this because the anvils on this type of tool are not backed up by a frame as in a regular micrometer and could bend slightly. 1", .001" Grad, Friction Thimble, Lock Nut, Carbide Spindle.
- Manufacturer Name: L.S. StarrettAccuracy: +/-0.0002 inAnvil Type: Round and FlatCountry of Origin: USDimensions: 4-23/64 in L x 39/64 in W x 1-25/32 in HFinish: Satin ChromeGraduations: 0.001 inManufacturer Name: L.S. StarrettMaterial: Forged SteelMeasuring Range: 0 to 1 inResolution: 0.001 inSeries: 220Spindle Diameter: 0.235 inSpindle Type: FlatThimble Type: Friction
- Rigid one-piece frame of drop forged steel, ribbed for strength and stability
- Extremely hard and stable one-piece spindle
- Micro-lapped measuring faces
- Will handle a wide variety of measurements impossible to obtain with regular micrometers
- Starrett satin chrome finish, no-glare and resists rust
- Advanced sleeve design with staggered lines and distinct figures for precise and easy readability
- Ring-type knurled lock nut for quick and sure locking
- Interchangeable anvils are rigidly held in the vise type frame and quickly interchanged by a single lock screw adjustment
- Two hardened anvils furnished - round anvil approximately 0.120 in diameter and flat anvil approximately 1/8 in and 0.060 in thick
- PROP65: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm
- The Starrett 220M Mul-T-Anvil Micrometer with Round and Flat Anvils, Carbide Faced Spindle was a new development in micrometer design and patent is held by Starrett. This micrometer will handle a wide variety of measurements impossible to obtain with regular micrometers, such as measuring the wall thickness of tubing, cylindrical walls from a hole or slot to an edge, many hard-to-reach locations, and the thickness of screw heads, shoulder lengths, etc. A most interesting feature of this tool is that additional anvils of various shapes can be made up, and many of these anvils do not have to be hardened for that special job. This micrometer can be furnished with .0001" graduations, but we recommend .001" or 0.01mm for easier and more accurate readings. The Starrett Company, with our years of experience, recommends this because the anvils on this type of tool are not backed up by a frame as in a regular micrometer and could bend slightly. 1", .001" Grad, Friction Thimble, Lock Nut, Carbide Spindle.
Pricing Notice
Due to evolving trade policies, product prices may be subject to change. For details, please refer to our Terms of Sale. We remain committed to offering competitive pricing and exceptional service.
Terms of SaleHave a Question About a Product?
Our team is here to answer all your questions and provide the detailed information and support you need to make product decisions.
Contact UsL.S. StarrettStarrett 220XFL-1 Multi-Anvil Micrometer, 0 to 1 in Measuring, Graduations 0.001 in, Forged Steel, Satin Chrome
Part #:530450746
MFG #:50746$520.15
/ EA