JET JT9-354550 Drill Press, 115/230 V AC, 15 in Swing, 12-1/2 in L x 14-1/2 in W Table
Pricing Notice
Due to evolving trade policies, product prices may be subject to change. For details, please refer to our Terms of Sale. We remain committed to offering competitive pricing and exceptional service.
Terms of SaleHave a Question About a Product?
Our team is here to answer all your questions and provide the detailed information and support you need to make product decisions.
Contact UsJET JT9-354550 Drill Press, 115/230 V AC, 15 in Swing, 12-1/2 in L x 14-1/2 in W Table
ManufacturerJET
Part #720305816
MFG #354550
UPC #662756092687
JET, JT9-354550, Drill Press, 15 in Swing, MT-2 Spindle Taper, 400 to 5000 rpm Spindle Speed, Variable Spindle Speed, 25-3/4 in Spindle to Table Distance, 12-1/2 in L x 14-1/2 in W Table, 10-1/2 in L x 15 in W Base, 3 in Diameter Column, 115/230 V AC, 30 in L x 20 in W x 71 in H Dimensions
$3,912.27
 / EAKnowledgeable Product TeamBenefit from our experienced team, ready to assist you with expert product knowledge and ensure a seamless shopping experience.
- Manufacturer Name:Â JPW IndustriesBase Dimensions:Â 10-1/2 in L x 15 in WColumn Diameter:Â 3 inCountry of Origin:Â TWDimensions:Â 30 in L x 20 in W x 71 in HManufacturer Name:Â JPW IndustriesNumber of Spindle Speeds:Â VariableSpindle Speed:Â 400 to 5000 rpmSpindle Taper:Â MT-2Spindle to Table Distance:Â 25-3/4 inSwing:Â 15 inTable Size:Â 12-1/2 in L x 14-1/2 in WVoltage Rating:Â 115/230 V AC, 115/230 VAC
- LED Readout
- Full bearing support on quill for maximum spindle stiffness
- Hand wheel speed adjustment of 400 to 5000 rpm
- Large 2-1/4 in quill for greater accuracy
- 3 in column diameter for maximum head support
- 6 in stroke for deep hole application
- Accurate depth stop for precise hole depths
- 1/2 in drill chuck and arbor included
- Safety collar
- 15 in drills to center of circle
- 5/8 in cast iron drilling capacity
- 1/2 in mild steel drilling capacity
- 7-1/2 in distance column to spindle
- 2-1/4 in Dia quill
- 47-1/2 in distance spindle to base
- 1 Phase, 60 Hz
- These JET Drill Presses use a variable-speed motor with the stepped-pulley system, and come equipped with a continuously variable transmission. This enables use at a wide range of speeds, as well as the ability to change speed during operation. A scale-marked hand wheel that matches the desired machine speed is mounted to a reduction gearing system for precise operator control. This adjusts the gearing ratio between the motors fixed pulley and the output shafts variable pulley, changing the speed of the chuck. A tensioner pulley is implemented in the belt transmission to take up or release the slack in the belt as the speed changes.
- Manufacturer Name:Â JPW IndustriesBase Dimensions:Â 10-1/2 in L x 15 in WColumn Diameter:Â 3 inCountry of Origin:Â TWDimensions:Â 30 in L x 20 in W x 71 in HManufacturer Name:Â JPW IndustriesNumber of Spindle Speeds:Â VariableSpindle Speed:Â 400 to 5000 rpmSpindle Taper:Â MT-2Spindle to Table Distance:Â 25-3/4 inSwing:Â 15 inTable Size:Â 12-1/2 in L x 14-1/2 in WVoltage Rating:Â 115/230 V AC, 115/230 VAC
- LED Readout
- Full bearing support on quill for maximum spindle stiffness
- Hand wheel speed adjustment of 400 to 5000 rpm
- Large 2-1/4 in quill for greater accuracy
- 3 in column diameter for maximum head support
- 6 in stroke for deep hole application
- Accurate depth stop for precise hole depths
- 1/2 in drill chuck and arbor included
- Safety collar
- 15 in drills to center of circle
- 5/8 in cast iron drilling capacity
- 1/2 in mild steel drilling capacity
- 7-1/2 in distance column to spindle
- 2-1/4 in Dia quill
- 47-1/2 in distance spindle to base
- 1 Phase, 60 Hz
- These JET Drill Presses use a variable-speed motor with the stepped-pulley system, and come equipped with a continuously variable transmission. This enables use at a wide range of speeds, as well as the ability to change speed during operation. A scale-marked hand wheel that matches the desired machine speed is mounted to a reduction gearing system for precise operator control. This adjusts the gearing ratio between the motors fixed pulley and the output shafts variable pulley, changing the speed of the chuck. A tensioner pulley is implemented in the belt transmission to take up or release the slack in the belt as the speed changes.
Pricing Notice
Due to evolving trade policies, product prices may be subject to change. For details, please refer to our Terms of Sale. We remain committed to offering competitive pricing and exceptional service.
Terms of SaleHave a Question About a Product?
Our team is here to answer all your questions and provide the detailed information and support you need to make product decisions.
Contact UsJPW IndustriesJET JT9-354550 Drill Press, 115/230 V AC, 15 in Swing, 12-1/2 in L x 14-1/2 in W Table
Part #:720305816
MFG #:354550$3,912.27
 / EA