Dynabrade 64000 Superfinisher Tool Post Grinder, 4 in Belt, 1/16 to 1-1/2 ipm Speed, 0.5 hp, 115 VAC, 73 dB Sound

Specifications

Item Features

• Consistently attain repeatable finishes with this versatile new machine
• The unit and the control box can be built for front or back of the lathe, with an optional 15 ft (4.5 m) pendant for remote mounting of the control box
• With abrasive feed speed adjustable from 1-1/2 in (38.1 mm) to 1/16 in (1.6 mm) per minute, even diamond abrasives can be fully utilized
• With changeable contact wheels with widths of 1 in (25.4 mm), 2 in (50.8 mm), 3 in (76.2 mm) or 4 in (101.6 mm) and several contact wheel durometers, this machine can cover a wide variety of applications
• 5 in Dia contact wheel allows for up to 2 in (50.8 mm) shoulder clearance for getting into tight corners
• Machine mounts easily to lathe in less than 5 minutes, using a mounting bracket with a ground face. Once the bracket is indicated off the work piece, mounting the Superfinisher puts you very close to final setup
• The contact wheel oscillation can be adjusted from 15 cycles per second down to 0, giving the operator control over the process
• No tools are needed to change abrasive rolls and this simple procedure can be done very quickly
• An hour meter allows operator to schedule maintenance
• The unit has a precision air regulator, giving the operator repeatable control over the contact wheel pressure against the work piece
• Mounts to standard machine shop lathes in 5 minutes
• Constantly advances new abrasive at a speed from 1/16 in to 1-1/2 in per minute
• Precision air pressure regulator ensures a uniform contact force between the workpiece and roller
• Abrasive speeds as low as 1/16 in means utilizing all the abrasive, extending the abrasive life and eliminating re-use of roll with possible variance in finish
• Compact design makes the unit easier to fit onto almost any size lathe and provides good visibility of workpiece
• Balanced oscillating head with adjustable 0-15 cycles/second for smooth operation
• Front-of-lathe or back-of-lathe mounting configuration for user preference or lathes without reverse rotation
• No tools needed to change abrasive rolls
• Simple pneumatic clamping mechanism for quick abrasive changes
• GFI protection