Enerpac SG6TMSTD Secure Grip Flange Spreader Set
Pricing Notice
Due to evolving trade policies, product prices may be subject to change. For details, please refer to our Terms of Sale. We remain committed to offering competitive pricing and exceptional service.
Terms of SaleHave a Question About a Product?
Our team is here to answer all your questions and provide the detailed information and support you need to make product decisions.
Contact UsEnerpac SG6TMSTD Secure Grip Flange Spreader Set
ManufacturerEnerpac
Part #283510958
MFG #SG6TMSTD
- Manufacturer Name:Â EnerpacCountry of Origin:Â GBManufacturer Name:Â EnerpacOverall Height:Â 9.6 inOverall Length:Â 18.4 inPull Force:Â 6.7 tonSeries:Â SG SeriesSpread:Â 3.15 inType:Â Secure Grip
(1) SG6TM Tool, (1) 150 mm Vernier Caliper, (1) 3/8 in Drive Torque Wrench and 21 mm Socket, (1) Safety Block, (2) M24 Collets, (2) M27 Collets, (1) Instruction Manual and (1) Carry Case with Protective Foam Inserts
- The SG6TM secure grip bolt hole spreader can be used on all flange types with bolt hole sizes ranging from 24mm (0.94 in) to 30mm (1.18 in )
- The collet holders are supplied with adjustable drive cones which can be adjusted outward from their central position allowing the tool to spread flanges apart and remove a spacer, wafer or butterfly valve
- This low-to mid end, mechanical model offers up to 6.7 imperial tons of spreading force
- Spreading force of 13.4 imperial tons (120 kN) if used in pairs as recommended
- Short collet holder sets (SCH) are available which can offer improved range of application
- Collet holders can also be dismantled and inserted through bolt holes from opposite side
- Limited
- Usable on flanges specified to accept the following bolt sizes M24, M27, 7/8 in and 1 in
- (1) SG6TM Tool, (1) 150 mm Vernier Caliper, (1) 3/8 in Drive Torque Wrench and 21 mm Socket, (1) Safety Block, (2) M24 Collets, (2) M27 Collets, (1) Instruction Manual and (1) Carry Case with Protective Foam Inserts
- Manufacturer Name:Â EnerpacCountry of Origin:Â GBManufacturer Name:Â EnerpacOverall Height:Â 9.6 inOverall Length:Â 18.4 inPull Force:Â 6.7 tonSeries:Â SG SeriesSpread:Â 3.15 inType:Â Secure Grip
(1) SG6TM Tool, (1) 150 mm Vernier Caliper, (1) 3/8 in Drive Torque Wrench and 21 mm Socket, (1) Safety Block, (2) M24 Collets, (2) M27 Collets, (1) Instruction Manual and (1) Carry Case with Protective Foam Inserts
- The SG6TM secure grip bolt hole spreader can be used on all flange types with bolt hole sizes ranging from 24mm (0.94 in) to 30mm (1.18 in )
- The collet holders are supplied with adjustable drive cones which can be adjusted outward from their central position allowing the tool to spread flanges apart and remove a spacer, wafer or butterfly valve
- This low-to mid end, mechanical model offers up to 6.7 imperial tons of spreading force
- Spreading force of 13.4 imperial tons (120 kN) if used in pairs as recommended
- Short collet holder sets (SCH) are available which can offer improved range of application
- Collet holders can also be dismantled and inserted through bolt holes from opposite side
- Limited
- Usable on flanges specified to accept the following bolt sizes M24, M27, 7/8 in and 1 in
- (1) SG6TM Tool, (1) 150 mm Vernier Caliper, (1) 3/8 in Drive Torque Wrench and 21 mm Socket, (1) Safety Block, (2) M24 Collets, (2) M27 Collets, (1) Instruction Manual and (1) Carry Case with Protective Foam Inserts
Pricing Notice
Due to evolving trade policies, product prices may be subject to change. For details, please refer to our Terms of Sale. We remain committed to offering competitive pricing and exceptional service.
Terms of SaleHave a Question About a Product?
Our team is here to answer all your questions and provide the detailed information and support you need to make product decisions.
Contact Us