Enerpac SG4TMSTD Secure Grip Flange Spreader Set
Pricing Notice
Due to evolving trade policies, product prices may be subject to change. For details, please refer to our Terms of Sale. We remain committed to offering competitive pricing and exceptional service.
Terms of SaleHave a Question About a Product?
Our team is here to answer all your questions and provide the detailed information and support you need to make product decisions.
Contact UsEnerpac SG4TMSTD Secure Grip Flange Spreader Set
ManufacturerEnerpac
Part #283510941
MFG #SG4TMSTD
$4,801.00
 / EA- Manufacturer Name: EnerpacCountry of Origin: GBManufacturer Name: EnerpacOverall Height: 7-1/2 inOverall Length: 15.7 inPull Force: 4.2 tonSeries: SG SeriesSpread: 2.95 inType: Secure Grip
(1) SG4TM Tool, (1) 150 mm Vernier Caliper, (1) 3/8 in Drive Torque Wrench and 16 mm Socket, (1) Safety Block, (2) M16 Collets, (2) M20 Collets, (1) Instruction Manual and (1) Carry Case with Protective Foam Inserts
- The SG4TM secure grip bolt hole spreader can be used on all flange types with bolt hole sizes ranging from 17.5 to 23.5 mm
- Additional short collet holders are supplied within the tool kit allowing the tool to spread flanges apart and remove a spacer, wafer or butterfly valve
- This low end, mechanical model offers up to 4.2 imperial tons of spreading force
- Spreading force of 8.4 imperial tons (74 kN) if used in pairs as recommended
- Short collet holder sets (SCH) are available which can offer improved range of application
- Collet holders can also be dismantled and inserted through bolt holes from opposite side
- Usable on flanges specified to accept the following bolt sizes M16, M20, 5/8 in and 3/4 in
- (1) SG4TM Tool, (1) 150 mm Vernier Caliper, (1) 3/8 in Drive Torque Wrench and 16 mm Socket, (1) Safety Block, (2) M16 Collets, (2) M20 Collets, (1) Instruction Manual and (1) Carry Case with Protective Foam Inserts
- Limited
- Manufacturer Name:Â EnerpacCountry of Origin:Â GBManufacturer Name:Â EnerpacOverall Height:Â 7-1/2 inOverall Length:Â 15.7 inPull Force:Â 4.2 tonSeries:Â SG SeriesSpread:Â 2.95 inType:Â Secure Grip
(1) SG4TM Tool, (1) 150 mm Vernier Caliper, (1) 3/8 in Drive Torque Wrench and 16 mm Socket, (1) Safety Block, (2) M16 Collets, (2) M20 Collets, (1) Instruction Manual and (1) Carry Case with Protective Foam Inserts
- The SG4TM secure grip bolt hole spreader can be used on all flange types with bolt hole sizes ranging from 17.5 to 23.5 mm
- Additional short collet holders are supplied within the tool kit allowing the tool to spread flanges apart and remove a spacer, wafer or butterfly valve
- This low end, mechanical model offers up to 4.2 imperial tons of spreading force
- Spreading force of 8.4 imperial tons (74 kN) if used in pairs as recommended
- Short collet holder sets (SCH) are available which can offer improved range of application
- Collet holders can also be dismantled and inserted through bolt holes from opposite side
- Usable on flanges specified to accept the following bolt sizes M16, M20, 5/8 in and 3/4 in
- (1) SG4TM Tool, (1) 150 mm Vernier Caliper, (1) 3/8 in Drive Torque Wrench and 16 mm Socket, (1) Safety Block, (2) M16 Collets, (2) M20 Collets, (1) Instruction Manual and (1) Carry Case with Protective Foam Inserts
- Limited
Pricing Notice
Due to evolving trade policies, product prices may be subject to change. For details, please refer to our Terms of Sale. We remain committed to offering competitive pricing and exceptional service.
Terms of SaleHave a Question About a Product?
Our team is here to answer all your questions and provide the detailed information and support you need to make product decisions.
Contact Us$4,801.00
 / EA